Tissu softshell imperméable et coupe-vent à 3 couches avec membrane TPU collée dans les quatre sens

Présentation du produit

This four-way stretch waterproof and windproof softshell fabric is a 300 GSM, three-layer bonded material developed primarily for jackets and related garments. It consists of a 90% polyester/10% spandex stretch face fabric bonded with a TPU membrane and fleece.

The layered construction brings together the mobility of a four-way stretch outer fabric, the protective function associated with a TPU membrane, and the warmth and tactile comfort of a fleece backing. It is intended for buyers developing outerwear, sportswear, workwear, or other products that require a balance of movement, weather protection, warmth, and durability.

The source also describes the fabric as flame-retardant, anti-static, tear-resistant, and shrink-resistant. No test methods, performance grades, or measured results are stated. Buyers requiring these functions should confirm the final specification and request available test reports before sampling or bulk production.

Spécifications du produit

Payment timing and document requirements should be reconfirmed in the formal quotation or sales contract, as the source uses both “before shipping” and “upon receipt of a copy of the bill of lading.”

Matériau, construction, apparence et sensation au toucher

Four-way stretch face fabric

The outer layer contains 90% polyester and 10% spandex. Its four-way stretch construction allows movement in both the lengthwise and crosswise directions, making it commercially relevant for fitted jackets, articulated sleeves, active outerwear, and garments intended to move with the wearer.

The source does not provide a measured stretch percentage or recovery result. Buyers should therefore assess stretch, recovery, dimensional stability, and garment fit using an approval sample before confirming bulk production.

TPU membrane

A TPU membrane is positioned within the bonded structure. In this product, the membrane supports the stated waterproof and windproof functions while allowing the fabric to remain more flexible than many rigid protective constructions.

No hydrostatic-pressure rating, moisture-vapor transmission value, air-permeability result, membrane thickness, or seam-waterproofing result is supplied. If a program has a specific waterproofness, breathability, or wind-resistance target, communicate the required standard before quotation and request relevant testing.

Bonded fleece backing

The fleece layer gives the reverse side a warmer and softer character while adding body to the 300 GSM construction. This makes the fabric particularly relevant to cool-weather outerwear and garments where a comfortable inner surface is desirable.

The exact fleece composition, pile structure, color, and brushing specification are not stated and should be confirmed when these details affect garment design or sourcing requirements.

Principales caractéristiques du produit

• Movement and flexibility: Four-way stretch supports mobility in jackets, sportswear, and garments with shaped or articulated panels.
• Three-layer functionality: The stretch face, TPU membrane, and fleece backing combine external protection, flexibility, warmth, and inner-surface comfort.
• Weather-oriented construction: The product is presented as waterproof and windproof, making it relevant to protective outer layers. Required performance ratings should be confirmed for each market and end use.
• Substantial softshell weight: At 300 GSM, the fabric offers more body and warmth than lightweight shell materials.
• Additional source-described properties: Flame-retardant, anti-static, tear-resistant, and shrink-resistant characteristics are listed on the source page. Buyers should request available test information when these functions are mandatory.
• Made-to-order colors: Colors can be produced according to customer requirements, subject to lab-dip approval, MOQ, and production feasibility.
• Flexible packing: Standard roll lengths of 50 m, 100 m, or 200 m are available, with buyer-specific packing arrangements subject to confirmation.

Applications détaillées et cas d'utilisation

Softshell jackets and outdoor outerwear

Jackets are the product’s primary stated application. The four-way stretch face can support body movement and fitted or ergonomic garment shapes, while the TPU membrane contributes to the stated waterproof and windproof performance. The fleece backing provides warmth and a comfortable inner surface, making the construction suitable for cool-weather softshell jackets, walking jackets, travel outerwear, and similar protective garments.

Garment developers should confirm the required waterproofness, breathability, stretch recovery, and seam construction. A waterproof fabric alone does not make a finished garment waterproof; seams, zippers, pocket openings, hoods, and other construction points may require additional protection.

Sportswear and active outer layers

The stretch construction may be useful for warm-up jackets, training outerwear, hiking garments, cycling-related outer layers, and other sportswear where freedom of movement matters. The 300 GSM weight and fleece backing make it more appropriate for protective or insulating layers than for lightweight next-to-skin garments.

Buyers should test moisture management, breathability, recovery, abrasion resistance, and comfort under the intended activity conditions. Product suitability will depend on garment design, climate, and the performance target of the final program.

Industrial wear and protective workwear

The source lists industrial wear and describes the fabric as flame-retardant, anti-static, tear-resistant, and shrink-resistant. These characteristics may be commercially relevant to work jackets or uniforms requiring stretch, warmth, and protective functionality.

However, industrial or PPE applications normally require clearly defined standards and certified garment systems. The source does not state a flame-retardant standard, anti-static standard, protection class, test method, or certified end use. Buyers must provide the applicable standard and confirm test evidence before treating the fabric as suitable for regulated protective clothing.

Suits and structured garments

The source includes suits among the possible applications. At 300 GSM with a membrane and fleece backing, this fabric is more likely to suit softshell-style travel suits, performance uniforms, warm structured separates, or contemporary technical tailoring than conventional formal suiting.

Sampling is recommended to evaluate bulk, drape, pressing behavior, seam appearance, and compatibility with the intended silhouette.

Bags, luggage, upholstery, toys, and home-textile products

The original page also lists bags, bedding, lining, home textiles, sofas, luggage, and toys. These should be treated as conditional applications rather than automatically suitable uses.

For bags and luggage, buyers should evaluate abrasion, seam strength, coating or lamination durability, and load-bearing construction. Upholstery and sofa programs may require separate abrasion, pilling, colorfastness, flammability, and restricted-substance testing. Bedding, lining, and toy applications may have different hand-feel, breathability, hygiene, and market-specific safety requirements. Confirm the application with FabricsTrades and test the final construction before bulk production.

Considérations de conception et de fabrication

• Prototype before bulk production: Confirm weight, usable width, stretch, recovery, fleece character, color, bonding quality, and surface appearance on an approval sample.
• Allow for fabric thickness: The 300 GSM three-layer structure is bulkier than a single-layer stretch woven. Seam types, seam allowances, binding, facings, and zipper installation should accommodate the added thickness.
• Evaluate seam performance: Needle size, point type, thread, stitch density, and seam construction should be trialed to reduce skipped stitches, seam damage, puckering, or membrane perforation.
• Plan waterproof construction separately: If the finished garment requires waterproof seams, evaluate compatible seam-sealing tape and equipment using the actual production fabric.
• Control cutting and relaxation: Stretch fabrics should be relaxed and checked for dimensional stability before bulk cutting. Spreading tension should be controlled to avoid distorted panels.
• Approve color under agreed lighting: Use lab dips and approval samples to confirm color before bulk production. Color tolerance and assessment conditions should be agreed during order confirmation.
• Test bonding durability: When wash durability, delamination resistance, or long-term performance is critical, request testing based on the intended care method and end use.
• Confirm care instructions: No washing, drying, ironing, bleaching, or dry-cleaning instructions are stated. Care labeling should be established after testing the final fabric, color, membrane, fleece, trims, and garment construction.
• Confirm functional requirements early: If flame retardancy, anti-static behavior, waterproofness, wind resistance, tear resistance, or shrinkage control is mandatory, communicate the required test method and acceptance level before sampling and quotation.

Personnalisation, échantillonnage et commande en gros

Colors are available according to customer requirements. A lab dip normally takes 3–5 days, while a plain-color approval sample normally takes 7–10 days. The stated MOQ is 1,000 meters per color.

OEM service is available subject to the buyer’s requirements, and the source states that logos can be customized on the products. Buyers should confirm how the logo will be applied, because branding feasibility may depend on the fabric surface, garment design, printing or transfer process, order quantity, and required durability.

Bulk production is stated as 3–20 days. The exact lead time should be confirmed against color, finish, testing, approval status, production quantity, and factory schedule. Production information on the source page states daily output of up to 150,000 meters and monthly capacity of more than 3 million meters.

Standard packaging is available in rolls of 50 m, 100 m, or 200 m. Alternative packing can be arranged according to customer requirements. Typical stated loading quantities are 40,000 meters for one 20GP container and 60,000 meters for one 40GP container. Final loading quantity may vary with roll length, packing method, fabric volume, and container limitations.

For first-time clients, the usual payment arrangement is 30% down payment and 70% before shipping by T/T. The specification section also states that the 70% balance is payable upon receipt of a copy of the bill of lading. Repeat clients may be considered for L/C, and other payment terms can be negotiated. Confirm the final arrangement in the quotation and contract.

Samples may be shipped by express. Bulk orders can be arranged by sea freight or another agreed method. Pricing is determined according to quantity and quality, with larger quantities generally eligible for more favorable pricing.

Support à l'approvisionnement et au développement de FabricsTrades

FabricsTrades is located in Wujiang District, Suzhou, within one of the world’s most concentrated textile manufacturing regions. In addition to operating its own four-way stretch fabric factory, FabricsTrades works with nearby weaving, knitting, dyeing, printing, coating, bonding, finishing, and garment-support facilities.

If this standard 300 GSM polyester/spandex TPU-bonded softshell does not fully match a project, the team can help evaluate alternative colors, constructions, finishes, specifications, or development routes. Availability and MOQ depend on the requested change, so buyers should submit their target specification for a feasibility review.

The source also states more than 10 years of experience in polyester taffeta, satin, Oxford fabric, and related products, with customers in the Middle East, South America, and Europe.

Règlement sur les tissus 2024-2026 & Mise à jour de conformité

Waterproof and protective textiles may receive water-repellent finishes or other chemical treatments, although the source does not identify the chemistry used on this product. Buyers placing the fabric in the EU market may therefore need to review the Restriction universelle PFAS de l'UE REACH et le Restriction REACH PFHxA de l'UE when the final specification includes relevant substances or treatments.

These resources provide regulatory context and do not prove that this product is certified, PFAS-free, or compliant with any particular legal requirement. Requirements can vary according to destination market, product category, end use, finish, chemical formulation, production batch, and date of sale.

Before sampling or bulk production, buyers should communicate any restricted-substance list, retailer standard, waterproofing-chemistry restriction, traceability requirement, or documentation requirement. Contact FabricsTrades to ask about available test reports, declarations, certificates, technical data, batch information, or third-party testing support for the final agreed specification.

Foire aux questions

Combien de temps faut-il pour effectuer une immersion en laboratoire ?

Une immersion en laboratoire prend normalement 3 à 5 jours. Un échantillon d'approbation de couleur unie prend normalement 7 à 10 jours.

FabricsTrades peut-il fournir un service OEM ?

Yes. OEM service depends on the buyer’s requirements, and the source states that logos can be customized on the products. Confirm the branding method, artwork, quantity, durability requirement, and final application before ordering.

Quelle est la capacité de production ?

The source states a daily output of up to 150,000 meters and monthly production capacity of more than 3 million meters. Available capacity for a specific order should be confirmed against the required construction, color, finish, quantity, and production schedule.

Quel est le délai de production en vrac ?

The stated bulk-production lead time is 3–20 days. The confirmed schedule will depend on quantity, color approval, material availability, testing, customization, and production planning.

Les acheteurs peuvent-ils visiter l’usine ?

Yes. Factory visits are welcome by arrangement, and airport or station pickup may be available. Confirm the date, pickup location, and visit schedule in advance.

Comment est déterminé le prix du produit ?

The price is determined according to the required quality and order quantity. The source indicates that larger quantities may receive more favorable pricing. Request a quotation based on the exact color, finish, quantity, packaging, testing, and delivery terms.

Quelle est la longueur d'un yard en mètres ?

Un mètre équivaut à 0,9144 mètre.

Is this fabric suitable for waterproof jackets?

It is specifically presented as a waterproof and windproof three-layer softshell fabric for jackets. Buyers should still confirm the required waterproof rating, breathability, bonding durability, and seam-sealing system through testing and garment sampling.

Is the fabric certified as flame-retardant or anti-static?

The source describes the fabric as flame-retardant and anti-static, but it does not provide a standard, performance grade, certificate, or test result. If these functions are mandatory, provide the applicable standard and request available supporting documentation or testing before bulk production.

What is the MOQ for a custom color?

The stated MOQ is 1,000 meters per color. Color development normally begins with a lab dip, and the approved color should be confirmed before bulk production.

What documents can buyers request?

Depending on the final specification, finish, production batch, destination market, and testing request, buyers may ask FabricsTrades about available test reports, certificates, declarations, technical data, traceability records, or third-party testing support.

Demander un devis ou un échantillon

For an accurate quotation or sample recommendation, provide your intended application, required composition, target weight and width, color, finish, quantity, destination market, testing standard, documentation requirements, packaging preference, and target delivery date.

Contact FabricsTrades to request a quotation, fabric sample, lab dip, approval sample, available test report, certificate, declaration, technical information, or custom-development evaluation.