Plaid poly bonded fabric Softshell fabric waterproof for jacket 4 way stretch bonded polar fleece outdoor functional fabric

Product Overview

This plaid polyester-bonded softshell is a 320 gsm functional fabric designed primarily for jackets and outdoor outerwear. The source describes a four-way stretch polyester/spandex face bonded with TPU and fleece, combining freedom of movement with a soft, insulating backing and waterproof functionality.

Its 92% polyester and 8% spandex composition makes it relevant to outdoor, sportswear, workwear, and other garment programs that need stretch, coverage, and a substantial softshell construction. Because no quantified waterproof, breathability, flame-retardant, anti-static, tear, shrinkage, or stretch-recovery results are provided, buyers should communicate the required test methods and acceptance levels before sampling or bulk production.

Product Specifications

Material, Construction, Appearance, and Hand Feel

The face fabric contains polyester for durability and dimensional stability, together with 8% spandex to provide four-way stretch. This construction can improve mobility in shaped jackets and active outerwear, particularly around the shoulders, elbows, and torso. The exact stretch percentage, recovery, and dimensional behavior should be checked on the approved sample.

A TPU layer is bonded to the stretch face and fleece backing. The source identifies the fabric as waterproof, but it does not provide a hydrostatic-pressure rating, moisture-vapor transmission result, air-permeability value, or membrane specification. Buyers should therefore define the required waterproofness and breathability levels according to the intended garment and destination market.

The fleece backing contributes a soft inner surface and added thermal comfort. Depending on the jacket design, it may reduce the need for a separate lining, although lining decisions should be made after evaluating next-to-skin comfort, garment construction, seam bulk, and the required appearance.

The plaid effect adds a visible design element suitable for casual and outdoor styling. Plaid repeat dimensions, pattern-matching tolerances, colorfastness, and whether the effect is yarn-dyed or printed are not stated and should be confirmed during development.

Key Product Features

Four-Way Stretch

The polyester/spandex face stretches in both principal directions, supporting movement in jackets, sportswear, and workwear. Buyers should request stretch-and-recovery data when the garment uses close fits, articulated panels, or areas subject to repeated extension.

Bonded Softshell Construction

The TPU and fleece bonding combines the face, functional layer, and backing into one fabric. This can simplify garment construction and create a substantial softshell handle, but lamination adhesion should be evaluated after washing, flexing, heat exposure, and any required aging test.

Supplier-Described Waterproof Performance

Waterproof performance is listed on the source page. The applicable rating and test method are not specified. Buyers should define the required hydrostatic-pressure standard and evaluate finished seams, because needle holes can reduce the water resistance of the completed garment.

Additional Source-Listed Functions

Flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are also listed. No test methods, performance grades, durability periods, or certification details are provided. If any of these properties is essential, confirm whether it is inherent or finish-dependent and request an applicable test report for the final specification, color, and production batch.

Detailed Applications and Use Cases

Softshell and Outdoor Jackets

This is the primary recommended application. Its 320 gsm weight, four-way stretch face, TPU bonding, and fleece backing suit hiking jackets, trekking layers, casual outdoor shells, travel jackets, and other substantial outerwear.

The stretch can support ergonomic pattern cutting and articulated sleeves, while the fleece backing adds warmth and a soft inner surface. For garments marketed with a waterproof claim, buyers should specify the required fabric rating and determine whether seam tape, waterproof zippers, storm flaps, or other construction measures are necessary.

Sportswear and Active Outer Layers

The fabric may be evaluated for warm-up jackets, training outer layers, outdoor teamwear, and mobility-focused sports garments. Four-way stretch can improve freedom of movement, while the bonded construction provides more coverage and structure than a lightweight single-layer stretch fabric.

Because no breathability or moisture-management value is stated, high-output athletic applications should be approved only after wear trials and relevant laboratory testing. Designers may also consider ventilation panels or lighter complementary fabrics where heat and moisture management are priorities.

Workwear and Industrial-Style Outerwear

The product page tags include industrial wear. The substantial bonded construction, stretch, and source-listed tear-resistant and anti-static properties may be relevant to work jackets requiring mobility and coverage.

However, general marketing descriptions are not substitutes for occupational-safety data. Buyers must identify the required anti-static, flame-retardant, visibility, abrasion, or protective-clothing standard before quotation and request testing for the exact finished fabric. The fabric should not be presented as certified protective material unless the relevant evidence is available.

Casual Jackets and Structured Outerwear

The plaid appearance can support casual jackets, overshirts, shirt-jackets, and other structured cold-weather styles. The fleece backing creates a warmer, more substantial result than an ordinary shirting or suiting fabric.

Pattern matching should be included in marker planning and consumption estimates. Sample garments should also be checked for seam bulk, drape, collar roll, pocket construction, and compatibility with cuffs, waistbands, facings, and zippers.

Conditional Non-Apparel Applications

The source page also references bags, luggage, bedding, linings, home textiles, sofas, toys, and suits. These should be treated as secondary or conditional uses rather than assumed primary applications.

For bags or luggage, evaluate abrasion resistance, coating or membrane damage at folds, seam strength, and reinforcement needs. Upholstery, bedding, toys, and other home-textile uses may require different flammability, chemical, durability, care, and product-safety standards. Formal suiting and lightweight linings may not be compatible with a 320 gsm fleece-bonded construction unless a specialized design is intended. Approve these applications through sampling and market-specific testing before bulk production.

Design and Manufacturing Considerations

• Plaid matching: Confirm the plaid repeat and face direction before marker development. Matching across center fronts, pockets, side seams, sleeves, and collars may increase fabric consumption.
• Usable width: The page states both 57″-60″ and 150 cm +/- 2 cm. Confirm the contracted usable width, including any edge area that should be excluded from cutting.
• Stretch control: Check stretch percentage, recovery, relaxation, and directional behavior before grading close-fitting styles.
• Needle and thread selection: Conduct sewing trials on the approved fabric. Needle type, size, thread, stitch density, and presser-foot pressure should be selected to avoid skipped stitches, excessive perforation, puckering, or damage to the laminate.
• Waterproof garment construction: Ordinary stitched seams create needle holes. If the finished garment requires waterproof seams, evaluate compatible seam tape, sealing temperature, pressure, dwell time, and adhesion.
• Bond durability: Test lamination strength before and after the intended washing, flexing, aging, and temperature cycles. Confirm that the TPU layer and fleece backing remain stable.
• Seam bulk: The 320 gsm fleece-bonded construction can create thickness at intersecting seams. Grade seam allowances and test collars, cuffs, pocket edges, hems, and zipper areas.
• Color approval: Use a lab dip or other agreed color-approval method before production. The stated 7-10 day approval-sample timing applies to plain colors; development timing for a customized plaid or other special effect should be confirmed separately.
• Care labeling: No washing, drying, ironing, or dry-cleaning instructions are provided. Establish the care label from testing of the final color, membrane, bonding adhesive, and functional finish.
• Performance verification: Depending on the project, buyers may need to test weight, width, colorfastness, dimensional stability, stretch and recovery, tear strength, abrasion, hydrostatic pressure, breathability, bond strength, flame behavior, and electrostatic properties.

Customization, Sampling, and Bulk Ordering

Colors can be developed according to the customer’s requirements. OEM service is available subject to project feasibility, and the source states that logos can be customized on the products. Buyers requiring custom specifications, graphics, finishes, backing, packaging, or other changes should confirm feasibility, MOQ, cost, and development time before sampling.

The standard MOQ is 1,000 meters per color. A lab dip normally takes 3-5 days, while an approval sample for a plain color normally takes 7-10 days. The listed mass-production lead time is 3-20 days. Actual timing may depend on color approval, finish, lamination, testing, quantity, raw-material availability, and production scheduling.

Products can be packed in rolls of 50, 100, or 200 meters, or according to the buyer’s packing requirements. The page states usual loading quantities of approximately 40,000 meters for one 20GP container and 60,000 meters for one 40GP container. Final loading depends on roll length, fabric volume, packing method, and container conditions.

Express and sea freight are listed as available shipping methods. Confirm the current payment options for samples directly with FabricsTrades because the existing page presents those methods as an image.

For large orders, the source consistently states a 30% T/T advance but gives two descriptions of the 70% balance trigger: one says before shipping, while another says upon receipt of a copy of the bill of lading. Confirm the exact balance condition in the quotation or pro forma invoice. L/C may be considered for repeat clients, and other payment terms may be negotiated.

FabricsTrades Sourcing and Development Support

Located in Wujiang District, Suzhou, FabricsTrades works within one of the world’s most concentrated textile-manufacturing regions. In addition to its own four-way stretch manufacturing capability, the company can coordinate with specialized weaving, knitting, dyeing, printing, coating, lamination, finishing, and garment-support facilities.

The source states more than 10 years of experience in polyester textiles, daily output of up to 150,000 meters, and monthly capacity exceeding 3 million meters. It also references customers in the Middle East, South America, and Europe.

If this standard 320 gsm construction does not fully meet a project requirement, the team can evaluate alternative colors, constructions, finishes, specifications, or custom-development routes. Availability and performance should always be confirmed for the requested application rather than assumed.

Factory visits are welcome, and the source states that airport or railway-station pickup can be arranged. Confirm the visit schedule and pickup details in advance.

2024-2026 Fabric Regulations & Compliance Update

Because this is a waterproof, TPU-bonded fabric intended for outerwear, buyers should review restrictions affecting PFAS chemistry in water-repellent finishes, membranes, coatings, lamination materials, and possible production-line contamination.

• European Union: Buyers supplying consumer apparel to the EU may need to review the EU REACH PFHxA restriction, including the application of Entry 79 requirements to general-public clothing, related accessories, and footwear from October 10, 2026.
• California: Buyers selling textile articles in California should review the California AB 1817 PFAS textile requirements. A general outdoor jacket should not automatically be assumed to qualify for the narrow temporary treatment available to severe-wet-condition outdoor apparel.

These links are contextual sourcing resources and are not evidence that this fabric is certified, PFAS-free, or compliant with a particular market requirement.

Before bulk production, buyers should communicate the destination market, product category, retailer restricted-substance list, intended waterproof claim, and required test methods. Where necessary, request documentation tied to the exact fabric specification, color, finish, membrane, and production lot, such as:

• Technical data for the TPU layer, bonding system, and water-repellent finish
• Chemical supplier SDS or TDS documents
• Restricted-substance or PFAS declarations
• Available third-party test reports
• Certificates of compliance required by the destination market
• Batch, lot, and shipment traceability information
• Additional testing arranged for the buyer’s specified standard

Document availability depends on the final specification, finish, production batch, destination market, and testing request. Requirements may change according to the product category and date of sale, so buyers should verify current legal and retailer requirements before approving bulk production.

Frequently Asked Questions

What is this plaid bonded softshell fabric made from?

It is made from 92% polyester and 8% spandex. The source describes a four-way stretch face bonded with TPU and fleece, with a total weight of 320 gsm.

Is the fabric waterproof?

Waterproof is a source-listed feature, but no hydrostatic-pressure rating or test method is stated. Confirm the required rating with FabricsTrades and request available test data or testing support before using a quantified waterproof claim.

What are the fabric’s width and yarn specifications?

The yarn/denier specification is 75D+40D x 75D+40D. The page lists the width as 57″-60″ and also as 150 cm +/- 2 cm, so the contracted usable width should be confirmed before ordering.

What is the MOQ?

The stated MOQ is 1,000 meters per color. Confirm whether a different MOQ applies to special finishes, custom backing, custom plaid development, logo customization, or trial orders.

How long does it take to finish a lab dip?

A lab dip normally takes 3-5 days. The listed approval-sample time is 7-10 days for a plain color; special plaid or functional-finish developments may require separate confirmation.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the project requirements, and the source states that logos can be customized. Provide the intended application, artwork, specification, quantity, and destination market so feasibility can be evaluated.

What is the production capacity?

The source states monthly production capacity of more than 3 million meters and daily output of up to 150,000 meters. Capacity for this exact bonded construction, color, and finish should be confirmed against the required delivery schedule.

What is the bulk-production lead time?

The listed mass-production lead time is 3-20 days. Actual timing depends on quantity, color approval, finishing, lamination, testing, raw-material availability, and production scheduling.

May buyers visit the factory?

Yes. Factory visits are welcome, and airport or railway-station pickup can be arranged. Confirm the appointment and travel details with FabricsTrades in advance.

How is the product price determined?

Pricing depends on the order quantity and required quality or specification. The source refers to three online quantity tiers and indicates that larger quantities may receive more favorable pricing. Request a current quotation for the exact construction, color, finish, quantity, packing, and delivery terms.

What are the payment terms?

For first-time clients, the source states a 30% T/T advance and a 70% balance. Because separate parts of the page describe the balance as due either before shipment or upon receipt of a copy of the bill of lading, confirm the exact trigger in the final quotation. L/C may be considered for repeat clients, and other terms may be negotiated.

How long is one yard in meters?

One yard equals 0.9144 meter.

Request a Quote or Sample

To request a quotation, lab dip, sample, test report, certificate, declaration, technical data, or custom-development evaluation, provide:

• Intended garment or end use
• Required composition and construction
• Weight and usable width
• Plaid, color, and finish requirements
• Required stretch, waterproof, breathability, flame, anti-static, tear, or shrinkage standard
• Order quantity and packing requirements
• Destination market
• Restricted-substance, testing, certification, or documentation requirements
• Target sample and bulk-delivery dates

FabricsTrades can then evaluate the most suitable specification, confirm feasibility and MOQ, and prepare an accurate quotation and development plan.