50D*75D New recycled polyester satin fabric for dress

Product Overview

The 50D*75D New recycled polyester satin fabric for dress is a lightweight polyester satin developed primarily for formal and casual dresses. The source product information describes the recycled material as being made from post-consumer plastic bottles.

Its soft, smooth surface, delicate satin appearance, flexibility, and draping ability make it suitable for garments that require graceful movement and a refined visual finish. A wide color selection is available, including classic black and white as well as brighter fashion colors.

The exact fiber percentage, recycled-content percentage, weight, width, density, and stretch performance are not published on the current product page. Buyers should confirm these specifications before sampling or bulk production, particularly when the fabric must satisfy a technical specification or documented recycled-content requirement.

Product Specifications

Specification	Available Information
Product Name	50D*75D New recycled polyester satin fabric for dress
Fabric Type	Recycled polyester satin
Yarn/Denier	50D × 75D
Material	Recycled polyester
Recycled Raw-Material Source	Described as post-consumer plastic bottles
Exact Fiber Composition	Not published; confirm the fiber percentages with FabricsTrades
Recycled-Content Percentage	Not published; request the applicable supporting documentation if required
Construction	Satin; the detailed weave structure and density are not published
Weight	Confirm with FabricsTrades
Width	Confirm with FabricsTrades
Surface and Hand Feel	Soft, smooth, lightweight, and delicate
Appearance	Elegant satin appearance
Performance Descriptions	Durable, flexible, and suitable for fluid draping
Stretch	No stretch direction or percentage is published; do not assume this is a stretch satin without confirmation
Color Options	Wide range, including black, white, and bright colors
Primary Applications	Formal and casual dresses
Page-Tagged Secondary Applications	Wedding and bridal products, sleepwear, linings, coats and jackets, bags and luggage, purses and totes, home décor, sofas, toys, and umbrella fabric; suitability must be confirmed for the final construction and performance requirement
MOQ	Not published; confirm according to color, specification, and order quantity
Lab-Dip Lead Time	Normally 3–5 days
Plain-Color Approval Sample	Normally 7–10 days
OEM Service	Available depending on the buyer’s requirements
Logo Customization	Available subject to the requested method and technical feasibility
Bulk-Production Lead Time	3–20 days
Monthly Production Capacity	More than 3 million meters
Pricing	Determined according to quantity and required quality; the online price uses three quantity-based tiers, with more favorable pricing at higher volumes
First-Order Payment Terms	Normally 30% down payment and 70% before shipping by T/T
Repeat-Order Payment Terms	L/C may be considered for repeat clients
Other Payment Terms	Negotiable
Shipping Methods	Express and sea freight
Packaging	Not published; confirm roll length, packing method, labeling, and export-mark requirements
Unit Conversion	1 yard = 0.9144 meter
Factory Visits	Welcome; airport or station pickup can be arranged

Material, Construction, Appearance, and Hand Feel

Recycled Polyester Input

The product is identified as recycled polyester satin, with the recycled input described as coming from post-consumer plastic bottles. This provides buyers with a recycled-material alternative for dress programs while retaining the smooth appearance and practical durability associated with polyester satin.

The page does not state the exact recycled-content percentage or identify a shipment-specific certification. If a program requires substantiated recycled-content claims, communicate the required standard before quotation and request the available scope certificate, transaction certificate, composition declaration, chain-of-custody information, or other applicable documentation.

50D × 75D Yarn Specification

The 50D × 75D designation identifies the stated yarn-denier specification. Because the weave density, finished weight, and width are not published, this designation should not be used by itself to infer the complete fabric specification.

Request a technical data sheet or physical sample when weight, opacity, tensile strength, seam performance, or dimensional stability is important to the garment design.

Satin Surface and Drape

Satin constructions are valued for their smooth face, light-reflecting appearance, and graceful drape. These qualities correspond with the source description of this fabric as soft, smooth, lightweight, delicate, flexible, and elegant.

The smooth surface can support flowing silhouettes, gathers, soft pleats, bias-inspired designs, and clean occasionwear styling. However, satin surfaces can also be sensitive to snagging, sewing marks, seam slippage, or uneven pressing depending on the final density and finish. These characteristics should be evaluated during garment sampling.

Key Product Features

• Recycled-material option: The polyester input is described as being made from post-consumer plastic bottles.
• Soft and smooth hand: Suitable for garments where a refined surface and pleasant tactile quality are important.
• Lightweight construction: Supports fluid dress designs without creating unnecessary bulk.
• Elegant appearance: The delicate satin surface adds visual sophistication to formal and fashion garments.
• Flexible draping ability: Suitable for silhouettes that rely on movement, gathering, or a flowing fall.
• Durability: The source describes the fabric as durable, supporting garment programs where practical wear performance is important.
• Broad color selection: Available colors include black, white, and brighter fashion shades.
• Wholesale production support: Monthly production capacity is stated as more than 3 million meters, with bulk lead times of 3–20 days.
• Quantity-based pricing: Larger orders generally receive more favorable unit pricing.
• Flexible shipping: Express and sea-freight options are available, with the exact schedule confirmed for each order.

Detailed Applications and Use Cases

Formal, Evening, and Occasion Dresses

This fabric is primarily suitable for formal and occasion dresses that require an elegant satin appearance and fluid movement. Its smooth face can help create a polished look under event lighting, while its lightweight character and draping ability support long skirts, soft A-line silhouettes, gathered waists, flowing panels, and bias-inspired designs.

For close-fitting or bias-cut garments, confirm stretch, seam slippage, recovery, and dimensional stability before finalizing the pattern. No stretch percentage is currently published, so the garment should not rely on elastic extension unless testing confirms it.

Casual and Fashion Dresses

The soft hand and flexible drape can also support casual dresses, relaxed silhouettes, fashion separates, and day-to-evening designs. The wide color selection allows sourcing teams to develop both neutral core styles and brighter seasonal collections.

For unlined casual dresses, evaluate opacity in the selected color. White and pale shades may behave differently from black or saturated colors, and the final lining decision should be made from the actual bulk-quality sample.

Wedding, Bridal, and Bridesmaid Designs

Wedding and bridal use appears among the product’s page tags and may be suitable where a lightweight satin surface and graceful drape are required. Potential applications include bridesmaid dresses, soft bridal layers, decorative panels, sashes, and selected gown components.

Before bulk production, evaluate shade consistency, opacity, surface marking, seam visibility, and compatibility with lining or interlining. White, ivory, and pale colors should be reviewed under the lighting conditions expected at the final venue or retail environment.

Sleepwear and Robe Programs

The product is also tagged for sleepwear. Its smooth hand and lightweight construction may support robes, loose pajamas, slips, and other relaxed garments where surface softness and drape are important.

Skin-contact comfort, colorfastness, seam construction, care performance, and applicable sleepwear regulations should be confirmed for the destination market. Because no stretch information is published, fitted sleepwear designs should be sampled before production.

Garment Linings

The smooth satin face may be useful for selected dress, coat, or jacket linings because it can help the garment move over underlying clothing. Lightweight bag, purse, and luggage linings may also be possible.

The final decision should consider weight, width, tear strength, seam slippage, abrasion exposure, and color migration. These performance values are not published on the current page and should be tested when the lining will experience frequent friction or load.

Conditional Decorative and Technical Uses

The product page includes tags for home décor, sofas, toys, bags, luggage, purses, totes, and umbrellas. These should be treated as conditional applications rather than confirmed performance uses.

• Bags, purses, and luggage: Consider the fabric primarily for linings or decorative components unless tensile, tear, abrasion, and seam-strength testing supports a more demanding use.
• Home décor and sofa applications: Confirm abrasion resistance, pilling, colorfastness, dimensional stability, and any applicable flammability requirements.
• Toys: Confirm the destination market’s chemical, mechanical, colorfastness, and product-safety requirements.
• Umbrellas: Do not assume water resistance or waterproof performance. Confirm whether a suitable coating or finish is available and test water resistance, hydrostatic performance, tear strength, UV exposure, and colorfastness as required.

Design and Manufacturing Considerations

Confirm the Complete Specification

Before pattern development, confirm the composition, recycled-content percentage, weight, usable width, density, stretch direction, stretch percentage, color, finish, and required performance standards. The 50D × 75D designation does not replace a complete technical specification.

Approve Opacity and Lining

Opacity is not published and may vary by color. Review the fabric over the intended lining, skin tone, seam allowance, and garment construction. Pale shades and close-fitting silhouettes may require a lining or additional layer.

Control Face Direction and Shade

A satin surface can reflect light differently when panels are cut in different directions. Mark the fabric face and maintain a consistent cutting direction unless the design intentionally uses directional contrast. Approve lab dips and bulk dye lots under the required lighting conditions.

Conduct Sewing Trials

Use the approved bulk-quality sample to determine the needle, thread, stitch length, seam type, and edge finish. A fine, sharp needle and lightweight thread may be appropriate starting points, but the final selection must reflect the actual weight and density.

Test for needle marks, puckering, seam slippage, fraying, and surface damage. Overlocking, narrow bound seams, or French seams may be considered after sewing trials where a clean internal finish is required.

Evaluate Pressing and Heat

Polyester is heat-sensitive. Establish pressing temperature, pressure, dwell time, and protective-cloth requirements on a production sample. Check for glazing, flattening, color change, water spotting, or permanent press marks before approving the garment process.

Test Pleating, Gathering, and Bias Effects

The fabric’s drape may support pleats, gathers, ruching, ruffles, and bias-inspired styling, but the final effect depends on weight, density, finish, and heat setting. Prepare a garment or component sample before confirming the bulk construction.

Define Quality Requirements Before Production

Depending on the application, consider requesting or arranging tests for:

• Fiber composition and recycled-content verification
• Finished weight and usable width
• Colorfastness to washing, rubbing, perspiration, light, or water
• Dimensional stability and shrinkage
• Tensile and tear strength
• Seam slippage and seam strength
• Abrasion, pilling, or snagging
• Restricted substances and retailer RSL requirements
• Water resistance or coating performance when requested
• Batch-to-batch shade consistency

Test methods and acceptance limits should be agreed upon before bulk production.

Customization, Sampling, and Bulk Ordering

Colors and Lab Dips

A wide range of colors is available, including black, white, and bright shades. Plain-color lab dips normally take 3–5 days, while approval samples normally take 7–10 days.

Send the required color reference, Pantone number, physical swatch, or approved garment standard when requesting color development. Confirm the color MOQ, acceptable tolerance, light source, and dye-lot requirements before ordering.

OEM and Logo Requests

OEM service is available depending on the buyer’s requirements, and logo customization may be considered. Specify whether the logo is required through printing, weaving, selvedge marking, labels, packaging, or another method so that FabricsTrades can evaluate feasibility, MOQ, cost, and lead time.

Printing, coatings, laminations, special finishes, and packaging customization are not confirmed as standard features for this product. Request a feasibility review if they are required.

MOQ and Samples

The product page does not publish an MOQ, sample MOQ, or sample charge. Confirm these according to the color, specification, customization level, available stock, and required documentation.

For an application-sensitive project, request a fabric swatch followed by an approval sample or garment trial before bulk booking.

Production Lead Time and Capacity

Bulk production normally takes 3–20 days. Monthly production capacity is stated as more than 3 million meters. The actual schedule will depend on quantity, color approval, material availability, finishing route, testing, documentation, packaging, and production loading.

Pricing

Pricing is determined according to the order quantity and required quality. The online price is divided into three quantity-based tiers, and larger quantities generally receive more favorable unit pricing.

For an accurate quotation, provide the required specification, color, finish, quantity, destination, packaging, testing, documentation, and delivery schedule.

Payment Terms

For first-time clients, the normal large-order payment arrangement is:

• 30% down payment by T/T
• 70% paid before shipping by T/T

L/C may be considered for repeat clients. Other payment terms can be negotiated in advance.

Shipping and Packaging

Available shipping methods include express and sea freight. Shipping is described as fast and reliable, but the final transit time and cost depend on shipment volume, destination, Incoterm, carrier availability, customs clearance, and documentation.

Packaging details are not published. Confirm roll length, inner and outer wrapping, labeling, carton or bale requirements, shipping marks, and palletization before placing the order.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, at the center of one of the world’s most concentrated textile manufacturing hubs. In addition to operating its own 4-way stretch fabric factory, the company works with specialized regional weaving, knitting, dyeing, printing, coating, finishing, and garment-support facilities.

For this recycled satin program, FabricsTrades can help buyers evaluate the existing construction, compare colors and samples, coordinate the appropriate production route, and discuss project-specific alternatives. If the standard product does not meet the required weight, width, hand feel, appearance, finish, price point, or documentation requirement, the team can evaluate alternative specifications or custom-development options.

Availability and feasibility depend on the requested construction, finish, quantity, testing standard, and delivery schedule.

2024–2026 Fabric Regulations & Compliance Update

Recycled polyester dress programs intended for the EU may need increasingly detailed product information covering fiber composition, recycled-content claims, production traceability, substances of concern, and supporting conformity records. Buyers can review this contextual resource on the ESPR and Digital Product Passport.

Requirements for apparel and textiles can also vary across markets according to product category, intended use, chemical finish, retailer standards, packaging, and date of sale. The Global Textile Compliance 2024–2026 overview provides additional sourcing context.

These resources do not prove that this individual fabric is certified or legally compliant. Before bulk production, buyers should identify the destination market and communicate all applicable fiber-labeling, recycled-content, restricted-substance, traceability, testing, packaging, and retailer requirements.

When necessary, request available:

• Technical data sheets
• Fiber-composition and recycled-content declarations
• Scope or transaction certificates where applicable
• Chain-of-custody and traceability information
• Restricted-substance declarations
• Finished-fabric test reports
• Certificates or conformity documents
• Production-batch records
• Third-party testing support

Document availability may depend on the final specification, color, finish, production batch, destination market, and testing request.

Frequently Asked Questions

How long does it take to finish a lab dip?

Normally, a lab dip takes 3–5 days. An approval sample for a plain color normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service is available depending on your requirements, and your logo can be customized on the products subject to the requested method and technical feasibility.

What is the monthly production capacity?

With advanced equipment and efficient teamwork, the stated production capacity has reached more than 3 million meters per month.

What is the delivery time for mass production?

The stated mass-production lead time is 3–20 days. Confirm the exact schedule according to the order quantity, color approval, finish, testing, and production loading.

May I visit the factory?

Yes. Factory visits are welcome, and airport or station pickup can be arranged.

How is the product price determined?

The price is determined according to the order quantity and required quality. The online unit price is divided into three quantity-based tiers, and higher quantities generally receive more favorable pricing.

How long is one yard of fabric?

One yard equals 0.9144 meter.

What is this recycled satin made from?

It is identified as recycled polyester satin, and the recycled material is described as coming from post-consumer plastic bottles. The exact fiber and recycled-content percentages should be confirmed before ordering.

Is this a stretch satin?

The current product page does not publish a stretch direction or percentage. Its described flexibility should not be treated as proof of elastic stretch; request a sample and confirm the construction before using it for a fitted design.

Does this satin require a lining?

The answer depends on the selected color, weight, opacity, silhouette, and intended garment. Because opacity is not published, evaluate the actual color sample over the intended lining or underlayer before production.

Request a Quote or Sample

To request an accurate quotation, fabric sample, or custom-development evaluation, please provide:

• Intended garment or end use
• Required fiber composition and recycled-content level
• Target weight and width
• Stretch requirement
• Color or physical reference
• Required finish or treatment
• Order quantity
• Destination market
• Testing standard or retailer RSL
• Certification, declaration, or traceability requirements
• Packaging and shipping requirements
• Target production and delivery date

Contact FabricsTrades to request a quotation, swatch, lab dip, approval sample, available test report, certificate, declaration, technical information, traceability documentation, or third-party testing support.