Cationic 4-way stretch two-color polyester fabric for short-sleeved summer shirt small suit sports and outdoor clothing fabric

Product Overview

This cationic four-way stretch polyester fabric combines multidirectional stretch with a distinctive two-color appearance. The existing product information describes it as lightweight, breathable, comfortable, durable, and easy to handle during garment production.

Its balance of stretch, visual interest, and polyester practicality makes it suitable for short-sleeved summer shirts, lightweight small suits, sportswear, outdoor clothing, and other garments that require both freedom of movement and a styled surface effect.

The product page does not state the precise fiber percentages, fabric construction, weight, width, stretch percentage, or standard finish. Buyers should confirm these parameters against the required end use before sampling or bulk ordering.

Product Specifications

The source provides two lead-time ranges: 3–20 days for mass production and normally 15–25 days after the down payment and lab-dip approval. Buyers should confirm the applicable schedule for the selected color, quantity, specification, and required testing before placing an order.

Material, Construction, Appearance, and Hand Feel

Polyester Material

The product is identified as a polyester fabric. The existing page describes the material as lightweight, breathable, comfortable, strong, and durable. These descriptions make it commercially relevant for garments that must remain easy to wear while accommodating regular movement.

The precise polyester percentage and the presence or absence of any stretch fiber are not stated. Buyers requiring a particular composition should request a confirmed specification or test report rather than assuming how the four-way stretch is produced.

Cationic Two-Color Appearance

The fabric uses a cationic coloration concept to create a two-color visual effect. This can give shirts, casual tailoring, and performance garments more surface interest than a visually flat solid color.

The source describes the colors as vibrant and long-lasting. Because no quantified colorfastness result or test method is provided, buyers should approve the lab dip and production sample under the intended lighting conditions and communicate any required washing, rubbing, perspiration, or light-fastness standard before production.

The exact yarn arrangement and dyeing route responsible for the two-color effect are not specified and should be confirmed when color consistency or repeatability is critical.

Four-Way Stretch and Comfort

The fabric is described as stretching in all directions, helping garments accommodate body movement and follow the wearer’s contours. This is particularly useful for fitted shirts, sports garments, active outdoor styles, and tailored items that need more mobility than conventional rigid fabrics.

The source does not provide stretch percentage, recovery, growth, or dimensional-stability data. These properties should be evaluated on a sample using the buyer’s intended garment pattern and performance requirements.

Handling During Garment Production

The existing page describes the fabric as easy to cut, sew, and manipulate, including for designs with more detailed construction. Actual cutting behavior, edge fraying, seam response, and needle requirements will depend on the confirmed fabric structure, weight, and finishing route.

Environmental Statement

The existing product page describes the material and production processes as environmentally friendly. No product-specific environmental certification, recycled-content percentage, lifecycle assessment, or supporting test documentation is stated. Buyers using an environmental claim should request the relevant evidence and approve the exact wording before marketing the finished garment.

Key Product Features

• Multidirectional flexibility: Four-way stretch helps garments move with the body and supports greater wearing freedom.
• Distinctive two-tone effect: Cationic coloration gives the fabric a visually differentiated two-color appearance.
• Warm-weather potential: Its source-described lightweight and breathable character makes it relevant to summer shirts and other lighter garments.
• Comfort-oriented performance: Stretch and a source-described comfortable hand can support close-fitting or movement-intensive designs.
• Polyester strength and durability: The material is positioned for garments requiring regular use while maintaining practical strength.
• Production versatility: The source describes the fabric as easy to cut and sew for multiple garment styles.
• Color development: Colors can be developed according to customer requirements, subject to lab-dip approval and production feasibility.
• Commercial supply support: Spot supply, OEM service, free A4 samples, and monthly capacity exceeding 3 million meters are stated on the existing page.

Detailed Applications and Use Cases

Short-Sleeved Summer Shirts

The fabric is recommended for short-sleeved summer shirts because its lightweight, breathable, and comfortable characteristics can support warm-weather wear. Four-way stretch may improve mobility across the shoulders, back, sleeves, and chest, especially in closer-fitting shirt silhouettes.

The cationic two-color appearance can add visual texture to casual, travel, work-leisure, or outdoor-inspired shirts without relying on a printed pattern. Designers should review the actual drape, opacity, skin contact, and stretch recovery before approving a shirt program. Light colors may require an opacity check.

Lightweight Small Suits and Casual Tailoring

For lightweight small suits, relaxed blazers, or casual tailored separates, four-way stretch can provide additional comfort through the shoulders, elbows, waist, and seat. The two-color effect may help create a contemporary, textured appearance suited to travel tailoring, smart-casual collections, and warm-season coordinates.

Suit buyers should confirm whether the selected weight and body provide the required structure. Lining, interfacing, seam stabilization, pocket construction, and pressing conditions should be determined through garment sampling. The page does not provide wrinkle-recovery, seam-slippage, or shape-retention data.

Sportswear

The fabric can be considered for sports tops, training garments, warm-up pieces, and other active styles where freedom of movement is important. Its four-way stretch supports dynamic motion, while its source-described lightweight and breathable character may contribute to wearing comfort.

No moisture-management, quick-drying, compression, UV-protection, or quantified breathability performance is stated. Buyers requiring these functions should specify the applicable test methods and request available reports or new testing before bulk production.

Outdoor Clothing

The combination of stretch, durability, comfort, and lightweight construction makes the fabric relevant to outdoor shirts, flexible overshirts, light hiking garments, travel clothing, and movement-oriented outdoor layers.

The existing page does not confirm water repellency, waterproofness, wind resistance, a membrane, a coating, UV protection, or an abrasion grade. These functions must not be assumed from the “outdoor” application. If the project requires a functional finish, communicate the target performance before sampling so FabricsTrades can evaluate feasibility, cost, hand-feel changes, and testing requirements.

Casual, Travel, and Commuter Garments

The fabric may also suit casual trousers, skirts, dresses, coordinated separates, or commuter clothing when the approved sample provides the required weight, opacity, drape, and recovery. Four-way stretch can improve comfort during sitting and movement, while the two-color appearance can support clean, understated styling.

These applications are conditional because the page does not specify GSM, width, fabric structure, or stretch recovery. Garment trials should be completed before confirming a new end use.

Design and Manufacturing Considerations

• Confirm the stretch mechanism: The page does not state whether stretch comes from yarn construction, mechanical stretch, elastane, or another method. Request the confirmed composition and construction.
• Measure stretch and recovery: Test stretch percentage, recovery, residual growth, and dimensional stability according to the intended garment fit.
• Approve color carefully: Use a lab dip and approval sample to review shade, two-tone contrast, metamerism, and appearance under relevant lighting.
• Plan cutting direction: Establish the warp, weft, face, back, and stretch directions before marker planning. Allow the fabric to relax before cutting when required.
• Run a sewing trial: Select needle size, thread, stitch type, seam construction, and machine settings after evaluating the actual fabric. Stretch seams must accommodate the garment’s movement without seam breakage or excessive puckering.
• Evaluate lining and opacity: Check light colors and tailored styles for show-through. A lining may be appropriate depending on the final color, weight, garment construction, and target market.
• Confirm edge behavior: Fraying and edge stability are not specified. Test overlocking, binding, turning, or other edge-finishing methods on the production fabric.
• Test application-specific performance: Depending on the program, buyers may need colorfastness, shrinkage, pilling, abrasion, seam strength, seam slippage, stretch recovery, wash durability, or breathability testing.
• Do not assume outdoor finishes: Water repellency, waterproofing, stain resistance, coatings, membranes, and UV protection are not listed as standard features.
• Establish garment care after approval: The page contains no care instructions. Washing, drying, ironing, and professional-care directions should be based on the final fabric specification, finish, trims, and garment test results.

Customization, Sampling, and Bulk Ordering

The product is listed as spot supply, with colors available according to customer requirements. Buyers should confirm whether the requested shade is available from current stock or requires a new dyeing run.

A free A4 reference sample is available. Standard timing stated on the page is normally 3–5 days for a lab dip and 7–10 days for a plain-color approval sample. OEM service and customized logos may be provided depending on the project requirements.

The source states a monthly production capacity of more than 3 million meters. Lead time varies according to the order: one part of the page states 3–20 days for mass production, while another states normally 15–25 days after the down payment is ready and the lab dip is confirmed. Confirm the final schedule before ordering.

MOQ is not provided. Request separate minimum quantities for available stock, custom colors, OEM production, and any special functional or finishing requirement.

Pricing depends on quantity, quality level, requested functions, and current production conditions. The source describes three quantity-based online pricing brackets and indicates that larger quantities receive more favorable pricing. Request a current quotation for the final approved specification.

For first-time clients, the usual payment arrangement is 30% down payment and 70% before shipment by T/T. L/C may be considered for repeat clients. T/T and L/C at sight are generally accepted, while other terms may be negotiated in advance.

Available shipping methods include express and sea freight. Packaging details, freight responsibility, delivery terms, and sample-shipping arrangements should be confirmed in the quotation.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, within one of China’s most concentrated textile-manufacturing regions. The company operates its own four-way stretch fabric factory and works as a fabric sourcing and product-development partner.

Access to nearby weaving, dyeing, printing, coating, finishing, and garment-support facilities can help buyers evaluate custom colors, alternative constructions, project-specific finishes, and other development options. If the standard product does not meet a program’s weight, width, appearance, stretch, or performance requirements, FabricsTrades can review possible alternatives or custom-development routes.

Availability, MOQ, pricing, lead time, testing, and technical feasibility must be confirmed for each requested modification.

2024–2026 Fabric Regulations & Compliance Update

Buyers selling polyester apparel in the European Union may need to prepare for product-information and supply-chain traceability requirements associated with the EU Ecodesign for Sustainable Products Regulation and Digital Product Passport. Depending on the applicable product rules and implementation date, buyers may need confirmed fiber composition, production-stage traceability, substances-of-concern information, and supporting technical documentation.

For outdoor clothing intended for California, the California AB 1817 PFAS textile restrictions may be relevant, particularly if the buyer requests water-, oil-, or stain-repellent chemistry. This product page does not state that the fabric has a repellent finish or that it is PFAS-free.

These resources provide sourcing context and are not evidence that this product is certified or legally compliant. Requirements vary by destination market, garment category, final finish, production batch, and date of sale. Buyers should communicate applicable restricted-substance standards before sampling and confirm their legal and retailer requirements before bulk production.

When necessary, contact FabricsTrades to request available test reports, certificates, declarations, technical data sheets, composition records, traceability information, or third-party testing support. Document availability will depend on the final specification, finish, production batch, destination market, and testing request.

Frequently Asked Questions

How long does it take to finish a lab dip?

A lab dip normally takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the buyer’s requirements, and the buyer’s logo can be customized on the products subject to feasibility confirmation.

What is the monthly production capacity?

With the stated equipment and production team, monthly production capacity is more than 3 million meters.

What is the delivery time?

The existing page states 3–20 days for mass production. It also gives a normal delivery range of 15–25 days after the down payment is ready and the lab dip is confirmed. Confirm the applicable lead time for the order quantity, color, specification, testing, and production schedule.

May buyers visit the factory?

Yes. Factory visits are welcome by arrangement. Airport or railway-station pickup may also be available.

How is the product price determined?

Price is determined according to quantity, quality, requested functions, and current production conditions. The source describes three quantity-based online pricing brackets, with more favorable pricing for larger quantities. Request a current quotation for the final specification.

How long is one yard in meters?

One yard equals 0.9144 meter.

Is a free fabric sample available?

Yes. A free A4 reference sample is available. Confirm sample availability, courier charges, and shipping arrangements before dispatch.

Is this fabric waterproof or water-repellent?

No waterproof, water-repellent, coating, or membrane specification is stated on the product page. Buyers requiring one of these functions should communicate the target performance and testing standard before sampling.

What technical specifications should be confirmed before ordering?

Confirm the exact composition, GSM, width, fabric construction, stretch percentage, recovery, color, finish, care requirements, and applicable test standards. These parameters are not fully stated on the existing page.

What is the MOQ?

The MOQ is not stated. Ask FabricsTrades to confirm the minimum quantity for spot stock, a custom color, OEM production, and any requested functional finish.

Request a Quote or Sample

For an accurate quotation or sample evaluation, please provide:

• Intended garment or end use
• Required fiber composition
• Target weight/GSM and width
• Required stretch and recovery
• Color or lab-dip reference
• Surface appearance and hand-feel target
• Required finish or functional performance
• Order quantity
• Destination market
• Testing standards
• Certificate, declaration, or traceability requirements
• Packaging and shipping requirements
• Target production and delivery date

Contact FabricsTrades to request a current quotation, free A4 reference sample, lab dip, approval sample, available technical documents, test reports, declarations, or a custom-development evaluation.