Factory direct sell solid color suitable for women’s clothing satin fabric

Product Overview

This custom-color polyester satin is a 100% polyester fabric designed for buyers who need a smooth, silky appearance combined with practical durability and flexible finishing options.

The fabric can be supplied as a plain-dyed satin or developed with silver, PA, PU, or PVC coating. Depending on the selected construction and finish, it may be used for women’s clothing, garment linings, bags, luggage, bedding, home textiles, and selected sofa or decorative furnishing applications.

Available weights range from 70 to 140 gsm. Buyers can select from source-listed denier combinations including 50D × 75D, 75D × 100D, and 75D × 150D, with other specifications subject to confirmation.

Product Specifications

The width ranges shown in inches and centimeters are not exactly equivalent. Buyers should confirm the required finished usable width, measurement method, and acceptable tolerance before ordering.

Functional properties can depend on the selected base construction, coating, finishing chemistry, and test method. Waterproof, flame-retardant, anti-static, tear-resistant, or shrink-resistant performance should therefore be confirmed against the required standard before sampling and bulk production.

Material, Construction, Appearance, and Hand Feel

The fabric is made from 100% polyester fibers and has the smooth, silky surface associated with satin fabric. Its lustrous appearance can help garments and textile products achieve a refined visual effect, while its soft surface makes it suitable for products that come into contact with clothing or skin.

The 70–140 gsm range provides options for lightweight linings and fashion garments as well as somewhat more substantial bags, home textiles, or coated applications. Final drape, opacity, surface gloss, stiffness, and hand feel will vary according to the selected weight, denier combination, dyeing process, and coating.

Plain-dyed fabric provides a clean solid-color appearance. Silver, PA, PU, and PVC coatings can be selected when the project requires a different backing, surface effect, structure, or functional result. Because coating can change the fabric’s weight, flexibility, hand feel, appearance, and sewing behavior, buyers should approve the finished coated sample rather than evaluating only the uncoated base fabric.

Key Product Features

Smooth and Silky Surface

The satin construction gives the fabric a smooth and luxurious feel. This makes it commercially relevant for women’s fashion, linings, decorative textiles, and other products where surface appearance and tactile quality matter.

Custom Color Development

The fabric can be produced in colors selected by the customer. Lab dips normally require 3–5 days, while approval samples for plain colors normally require 7–10 days. Color should be approved under the lighting conditions relevant to the final product because satin’s reflective surface can affect how a shade appears.

Multiple Weight and Denier Options

Weights from 70 to 140 gsm and several listed denier combinations allow buyers to evaluate different balances of lightness, drape, coverage, and structure. The final denier combination should be matched to the intended product rather than selected by price alone.

Plain-Dyed and Coated Constructions

Buyers may choose plain-dyed fabric or discuss silver, PA, PU, or PVC coating. Coated polyester satin may be considered for bags, luggage, protective linings, or other applications that need additional structure or water resistance.

Practical Production Handling

The fabric is lightweight and suitable for cutting and sewing into a wide range of shapes. Because smooth satin surfaces may shift during spreading or stitching, garment and product factories should confirm cutting, seam, needle, thread, and edge-finishing settings through a production sample.

Quantity-Based Factory-Direct Pricing

Pricing depends on the selected quality and order quantity. The online price uses three quantity brackets, with more favorable pricing generally available for larger orders. A final quotation should be based on the approved weight, width, denier, color, finish, quantity, packing, and testing requirements.

Detailed Applications and Use Cases

Women’s Dresses, Skirts, Blouses, and Occasionwear

The smooth surface, silky touch, and custom-color capability make this fabric suitable for women’s fashion pieces where sheen and visual impact are important. Depending on the selected weight, it may be evaluated for dresses, skirts, blouses, coordinated sets, decorative panels, and occasionwear.

The lighter options can create softer movement, while higher weights may provide more coverage and structure. Designers should evaluate opacity, drape, seam appearance, and the need for lining through a full-size sample. Satin can show needle marks, seam tension, and surface handling more visibly than matte fabrics, so production settings should be approved before bulk cutting.

Garment Linings

Polyester satin can be used as a lining for dresses, skirts, jackets, coats, uniforms, and fashion accessories. Its smooth surface can help the outer garment move more easily over the lining and can provide a clean internal appearance.

The selected weight should be compatible with the shell fabric. Buyers should confirm colorfastness, seam strength, shrinkage compatibility, and care requirements for both the lining and outer material.

Bags and Luggage

Plain-dyed or coated constructions may be evaluated for bag linings, organizers, pouches, luggage interiors, decorative panels, and selected outer components. PU, PVC, PA, or silver coating can be considered when the application requires additional backing, structure, or water resistance.

For outer bag and luggage use, buyers should confirm the required tear strength, abrasion performance, coating adhesion, seam strength, and waterproof test method. Reinforcement or backing may be necessary in load-bearing or high-abrasion areas.

Bedding and Home Textiles

The fabric’s solid colors, smooth texture, and decorative sheen make it suitable for selected bedding components, pillow covers, decorative panels, and other home-textile products.

The final construction should be selected according to the required hand feel, opacity, washing method, and durability. Before bulk production, buyers should approve laundering performance, shade stability, seam construction, and any applicable restricted-substance requirements.

Sofa and Decorative Furnishing Applications

The original product information lists sofas among the potential uses. Because the available weight is 70–140 gsm, the fabric may be more appropriate for decorative panels, covers, linings, trims, or backed constructions than for unsupported, high-abrasion upholstery.

Buyers considering sofa or upholstery use should confirm abrasion resistance, seam performance, backing requirements, colorfastness, flame-retardancy standards, and cleaning conditions through testing and application-specific sampling.

Waterproof or Functional Textile Products

The source lists waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant features. These properties may be relevant to coated bags, luggage, protective linings, home textiles, or specialist garments, but they should not be assumed to apply simultaneously to every version.

The buyer should identify each required function before quotation. FabricsTrades can then confirm the appropriate base fabric, coating or treatment, test method, performance target, MOQ, and available supporting documentation.

Design and Manufacturing Considerations

Select the Final Construction Before Approval

Plain-dyed and coated satin should be treated as different finished products. A coating can change the hand feel, flexibility, gloss, weight, drape, sewing behavior, and functional performance. Approve the complete finished construction, not only the base cloth.

Confirm Color on the Actual Fabric

Satin reflects light differently from matte woven fabrics. Review lab dips and approval samples under the intended retail, studio, or daylight conditions. Bulk shade tolerance and colorfastness requirements should be agreed before production.

Evaluate Opacity and Lining Requirements

Opacity is not specified in the source information and may vary across the 70–140 gsm range and between colors. Light shades and lightweight constructions should be checked over the intended lining, garment layer, or backing material.

Control Cutting, Sewing, and Edge Finishing

Trial spreading and cutting are recommended because the smooth surface may move between layers. Seam type, needle, thread, stitch density, tension, and edge-finishing method should be confirmed by the garment or product factory. Sampling is especially important for curved seams, gathered details, pleats, and visible topstitching.

Confirm Functional Test Standards

If waterproof, flame-retardant, anti-static, tear-resistant, or shrink-resistant performance is required, specify the destination market, end use, test method, target result, and wash or aging conditions before quotation. The source does not provide measured grades or identify which finish delivers each property.

Establish the Care Method

No specific washing or care instruction is supplied. Care requirements should be confirmed for the selected dyeing and coating system. Buyers should test washing, dry cleaning, heat exposure, pressing, and drying conditions as relevant to the final product.

Confirm Finished Width

The source lists both 57–67 inches and 150–170 cm. Because these ranges are not exact conversions, confirm whether the quotation refers to total width, cuttable width, or usable finished width.

Customization, Sampling, and Bulk Ordering

Custom colors are available according to the buyer’s requirements. A normal lab dip takes 3–5 days, and a plain-color approval sample normally takes 7–10 days.

OEM service is available depending on the project requirements. Logo customization and customized packing can be discussed, but feasibility, method, cost, and MOQ should be confirmed for the specific order.

The standard MOQ is 2,000 meters per color. Mass-production lead time is listed as 3–20 days. The exact schedule will depend on the order quantity, color approval, base construction, coating, production loading, testing, packaging, and shipment requirements.

Products can normally be packed in rolls of 50, 100, or 200 meters. Alternative packing can be arranged according to the buyer’s requirements. The source lists usual loading quantities of approximately 110,000 meters for one 20GP container and 220,000 meters for one 40GP container. Actual loading should be recalculated according to roll length, fabric weight, width, packing diameter, and shipping conditions.

Payment terms are 30% by T/T as advance payment and 70% by T/T upon receipt of the copy of the bill of lading.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, within one of the world’s most concentrated textile manufacturing regions. The company combines its own manufacturing capabilities with access to specialized weaving, dyeing, printing, coating, finishing, and garment-support resources.

The team has more than 10 years of experience working with polyester taffeta, satin, Oxford fabric, and related synthetic textiles. The source lists daily output of up to 150,000 meters and monthly production capacity of more than 3 million meters, with experience supplying customers in the Middle East, South America, and Europe.

If a standard satin construction does not meet the project requirements, FabricsTrades can help evaluate alternative denier combinations, weights, widths, colors, coatings, packing methods, or development routes. Availability and feasibility should be confirmed for each project.

Factory visits are welcome, and airport or railway-station pickup can be arranged.

2024–2026 Fabric Regulations & Compliance Update

For coated or waterproof satin intended for EU consumer clothing, accessories, footwear, bags, or related textile products, buyers may need to review the EU REACH PFHxA Restriction. The restriction begins applying to specified general-public clothing, related accessories, and footwear categories on 10 October 2026. A waterproof or coated product should not automatically be described as PFAS-free or compliant without confirming the actual finishing chemistry, production route, test method, and lot-specific documentation.

For fabric shipped into the EU, buyers may also need to review the EU Packaging and Packaging Waste Regulation. The PPWR generally applies from 12 August 2026 and can affect roll wrapping, polybags, cartons, pallet materials, and other packaging placed on the EU market.

Requirements vary according to destination market, product category, intended use, coating, finish, packaging configuration, and date of sale. Before bulk production, buyers should communicate any restricted-substance standard, retailer requirement, test protocol, packaging rule, traceability requirement, or documentation requirement.

Available supporting documents may depend on the approved specification, finish, production batch, destination market, and testing request. Contact FabricsTrades to ask about available technical data, test reports, certificates, declarations, coating or chemical information, traceability records, packaging information, or third-party testing support. No certification or legal-compliance status is confirmed by the supplied product information alone.

Frequently Asked Questions

Q1: How long does it take to finish a lab dip?

Normally, a lab dip takes 3–5 days. An approval sample for a plain color normally takes 7–10 days.

Q2: Can you provide OEM service?

Yes. OEM service depends on the buyer’s requirements, and logo customization can be discussed for the product.

Q3: What is your production capacity?

With advanced equipment and efficient teamwork, monthly production capacity has reached more than 3 million meters. Daily output can reach up to 150,000 meters.

Q4: What is the delivery time?

Mass-production lead time is 3–20 days. The final schedule depends on the approved specification, quantity, finish, production status, testing, and packing requirements.

Q5: May I visit your factory?

Yes. Factory visits are welcome, and airport or railway-station pickup can also be arranged.

Q6: How is the product price determined?

The price is determined according to the selected quality and order quantity. The online unit price is divided into three quantity tiers, and larger quantities generally receive more favorable pricing. Request a final quotation based on the complete specification.

Q7: How many meters are in one yard?

One yard equals 0.9144 meter.

Request a Quote or Sample

For an accurate quotation or sample evaluation, please provide:

• Intended garment, bag, lining, bedding, luggage, or home-textile application
• Required weight and denier combination
• Finished usable width
• Color or color reference
• Plain-dyed, silver-coated, PA-coated, PU-coated, or PVC-coated construction
• Required functional properties and test standards
• Quantity per color
• Roll length and packing requirements
• Destination market and shipping requirements
• Required test reports, certificates, declarations, or traceability documents
• Target sample and bulk-production schedule

Contact FabricsTrades to request a quotation, lab dip, approval sample, available technical documentation, compliance-support information, or evaluation of a custom polyester satin construction.