Yarn dyed polyester spandex satin fabric for women skirt dress blouse

Product Overview

This satin fabric is positioned primarily for women’s skirts, dresses, blouses, cocktail dresses, evening gowns, and other occasionwear. Its source-described satin sheen, silky-soft hand, lightweight quality, breathability, and stretch can support garments requiring visual fluidity, surface luster, and comfortable movement.

The available product source records contain an important specification difference:

• The product name and descriptive content identify a yarn-dyed polyester-spandex satin with stretch.
• The specification table identifies 100% polyester and lists plain-dyed or coated constructions.

These descriptions may represent different available constructions or outdated information. Buyers should therefore confirm the exact fiber composition, dyeing method, stretch direction and percentage, denier, weight, width, and finish when requesting a quotation or sample. A stretch-dependent garment pattern should not be approved until the selected quality has been physically tested.

Product Specifications

Material, Construction, Appearance, and Hand Feel

The fabric is presented within the polyester satin category. Its smooth face reflects light to create the characteristic sheen associated with satin, while the source describes the hand as soft, luxurious, lightweight, and breathable.

The composition must be confirmed carefully. A polyester-spandex construction would normally be selected when the garment requires measurable stretch and closer body conformity. A 100% polyester construction may behave differently in fit, recovery, drape, and seam performance. Buyers should request a current technical specification or composition declaration rather than relying only on the product name.

The listed 70–140 gsm range covers noticeably different fabric behaviors. Lighter options may be more appropriate for blouses, linings, fluid dresses, and layered garments. Heavier options may provide more coverage and body for skirts, structured dresses, or selected non-apparel applications. Final opacity, drape, weight, and hand should be evaluated using the exact sampled quality.

Plain-dyed and coated versions should also be treated as separate development routes. Silver, PA, PU, or PVC coating can change the fabric’s hand, drape, breathability, appearance, sewing behavior, and intended use. Confirm whether the requested finish is applied to the offered base fabric and whether it is suitable for direct skin contact or the intended end product.

Key Product Features

• Satin appearance: A smooth, lustrous surface supports fashion garments and occasionwear where sheen and visual movement are important.
• Soft, lightweight character: The existing description emphasizes a silky-soft hand, lightweight feel, and comfortable wear.
• Source-described stretch: The product is presented as stretchy and form-fitting, but the composition and measurable stretch performance require confirmation.
• Custom color development: Colors can be developed according to customer requirements, supported by lab dips and plain-color approval samples.
• Multiple construction options: Several denier combinations, weights, widths, and optional coating routes are listed.
• Commercial-scale supply: The source states daily output of up to 150,000 meters and monthly capacity exceeding 3 million meters.
• Optional functional development: Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are listed. Buyers should specify the required standard before sampling and request applicable testing for the final construction.

Detailed Applications and Use Cases

Women’s Dresses and Occasionwear

The satin face and flowing visual character are suitable for slip dresses, cocktail dresses, evening dresses, bridesmaid styles, and other occasion garments. The sheen can emphasize draping, bias-cut silhouettes, gathers, soft pleats, and moving skirt panels.

For lighter qualities, evaluate transparency and consider a lining or layered construction. For fitted dresses, confirm that the sampled fabric actually contains spandex and test its stretch direction, percentage, and recovery before finalizing the pattern. Formalwear programs should also approve color, shade consistency, snag resistance, seam appearance, and surface quality under the intended lighting.

Skirts

This fabric may be used for flowing midi skirts, bias-cut skirts, gathered styles, soft pleated designs, and selected fitted silhouettes. The preferred weight depends on the required coverage and structure: lighter constructions may create more movement, while heavier options may provide additional body.

Buyers should evaluate lining requirements, seam slippage, edge fraying, static behavior, and stretch recovery. The final construction should be approved through a garment sample, particularly when the design includes close fit, pleating, or bias cutting.

Blouses and Shirts

Lighter qualities may support blouses, soft shirts, draped necklines, tie-neck styles, gathered sleeves, and occasion tops. The smooth surface and sheen can create a polished appearance, while the source-described lightweight and breathable character may improve wearing comfort.

Trial sewing is recommended because satin surfaces can show needle marks, puckering, snagging, or handling damage. Interfacing, button-placket construction, seam type, needle selection, thread tension, and edge finishing should be evaluated using the production fabric.

Bridal and Formal Programs

The fabric may be considered for selected bridal-party garments, formal dresses, occasion blouses, trims, and decorative panels. Buyers should confirm shade accuracy, lot-to-lot consistency, opacity, lining compatibility, surface uniformity, and the response to pressing or steaming.

If the fabric will be combined with lace, embroidery, bonding, pleating, or embellishment, test the complete material package before bulk approval.

Linings and Sleepwear

Lower-weight constructions may be evaluated for garment linings or selected sleepwear. Required properties may include smoothness, low bulk, opacity, comfort, static control, colorfastness, and compatibility with the outer fabric. These characteristics are not quantified on the current page and should be checked through sampling and testing.

Bags, Luggage, Purses, and Totes

The source also lists bags and luggage as applications. These uses are more likely to require a heavier or coated construction than the qualities selected for blouses or dresses. Confirm abrasion resistance, tear strength, seam strength, coating adhesion, water resistance, backing, reinforcement, and hardware compatibility.

A garment-weight satin should not automatically be assumed suitable for load-bearing products.

Bedding, Home Textiles, and Sofas

Bedding, home-textile, and sofa applications appear in the source information. Suitability depends on selecting the correct weight, width, finish, and performance level. Upholstery or frequently handled products may require testing for abrasion, seam strength, colorfastness, flammability, cleaning, and dimensional stability.

The current page does not provide measured grades for these properties. Request testing against the intended market and end-use requirements before bulk production.

Other Conditional Applications

The page metadata also associates the product with coats and jackets, costumes, wedding and bridal products, umbrellas, and toys. These should be treated as development directions rather than confirmed uses. Each application may require a different base construction, coating, reinforcement, safety standard, or performance test.

Design and Manufacturing Considerations

• Approve the exact quality: The 70–140 gsm range and multiple denier combinations can produce substantially different drape, opacity, strength, and hand.
• Confirm composition and stretch: Obtain the selected quality’s fiber composition, stretch direction, stretch percentage, and recovery data before developing fitted patterns.
• Evaluate lining: Lighter colors or weights may require lining. Check opacity under realistic lighting and against the wearer’s intended base layer.
• Run sewing trials: Test seam appearance, seam slippage, puckering, needle marking, snagging, edge fraying, pressing, and finishing.
• Approve color properly: Use the 3–5-day lab-dip process and the 7–10-day plain-color approval sample process where applicable. Confirm shade tolerance and lot-control expectations.
• Treat coatings as separate specifications: PA, PU, PVC, and silver-coated versions may differ in drape, breathability, bonding, sewing, care, and regulatory requirements.
• Define functional requirements: If waterproof, flame-retardant, anti-static, tear-resistant, or shrink-resistant performance is required, communicate the applicable test method and acceptance value before quotation.
• Establish care instructions: No confirmed care instructions are provided. Wash, dry-clean, heat, pressing, and dimensional-stability requirements should be tested on the final composition and finish.
• Confirm usable width: Verify finished and cuttable width before calculating marker efficiency or consumption.
• Use pre-production approval: Review a representative sample or garment prototype before committing to bulk production.

Customization, Sampling, and Bulk Ordering

Color and finish: Custom colors are available according to customer requirements. Plain-dyed and optional silver, PA, PU, and PVC-coated routes are listed, subject to feasibility and confirmation.

OEM and branding: OEM service is available depending on the request. The existing page states that logos may be customized. Confirm the branding method, location, artwork, MOQ, and end-use requirements.

MOQ: The listed minimum order quantity is 2,000 meters per color.

Sampling timeline: Lab dips normally require 3–5 days. Plain-color approval samples normally require 7–10 days.

Bulk-production timeline: The existing page states 3–20 days for mass production. The confirmed schedule may depend on the selected construction, color, finish, quantity, approvals, and capacity at the time of ordering.

Capacity: Production capacity is listed as more than 3 million meters per month, with daily output up to 150,000 meters.

Packaging: Standard references include 50-, 100-, or 200-meter rolls. Other packing details may be arranged according to buyer requirements.

Container loading: The source gives usual references of approximately 110,000 meters for a 20GP and 220,000 meters for a 40GP. Confirm the actual loading quantity after the roll length, fabric weight, width, and packing method are finalized.

Payment: T/T 30% advance payment and T/T 70% upon receipt of the copy of the bill of lading.

Pricing: Pricing depends on quantity and quality. Larger quantities may receive more favorable pricing, but buyers should request a current quotation for the exact specification.

Factory visits: Factory visits are welcome. The existing page states that airport or station pickup can be arranged.

FabricsTrades Sourcing and Development Support

Located in Wujiang District, Suzhou, FabricsTrades works within one of the world’s most concentrated textile manufacturing regions. The company operates its own 4-way-stretch fabric factory and also works with specialized weaving, knitting, dyeing, coating, finishing, and garment-support resources in the surrounding supply chain.

For this satin program, FabricsTrades can help buyers compare available constructions, clarify conflicting legacy specifications, develop custom colors, evaluate coating options, arrange samples, and assess alternative fabrics when the standard item does not fully meet the project requirements.

The existing product page states more than 10 years of experience with polyester taffeta, satin, Oxford, and related fabrics, with customer experience across the Middle East, South America, and Europe. The exact production route and factory responsible for a particular order should be confirmed during quotation.

2024–2026 Fabric Regulations & Compliance Update

Buyers sourcing a coated or waterproof version for the EU market may need to review the EU REACH PFHxA Restriction and its relevance to fabric supply chains. Relevance depends on the chemistry used in the selected coating or treatment. If restricted-substance requirements apply, communicate them before sampling and request available chemical declarations, test reports, technical data, or third-party testing support.

EU apparel programs may also need to prepare product, material, durability, and traceability information in connection with the ESPR and Digital Product Passport. Applicable requirements can vary by product category, destination market, final specification, finish, and date of sale.

These resources do not establish that the fabric is certified or legally compliant. Buyers should confirm their specific legal, retailer, labeling, restricted-substance, traceability, and documentation requirements before bulk production. Available documents may depend on the final specification, production batch, destination, and testing request.

Frequently Asked Questions

Is this fabric 100% polyester or polyester-spandex?

The current product information contains both descriptions. The specification table states 100% polyester, while the product name and descriptive text state polyester-spandex. Confirm the exact composition against the selected sample, technical specification, or composition declaration before ordering.

Is this satin suitable for women’s dresses, skirts, and blouses?

Yes. These are the primary applications described on the page. The best weight and construction depend on the required drape, opacity, structure, fit, and stretch. A garment sample is recommended before bulk production.

Are waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties standard?

The source page lists these features, but it does not identify the applicable construction, treatment, test method, or measured result. Specify the required performance standard before quotation and request testing or supporting documents for the final fabric.

How long does it take to finish a lab dip?

Normally, a lab dip takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can you provide OEM service?

Yes. OEM service is available depending on the buyer’s requirements, and logo customization is listed. Confirm feasibility, method, MOQ, artwork, and application details during quotation.

What is the monthly production capacity?

The existing page states a production capacity of more than 3 million meters per month. Daily output is listed as up to 150,000 meters.

What is the bulk-production delivery time?

The listed mass-production time is 3–20 days. Confirm the schedule for the selected construction, color, finish, quantity, approval process, and required shipment date.

May I visit the factory?

Yes. Factory visits are welcome, and airport or station pickup may be arranged. Confirm the visit date and location in advance.

How is the price determined?

Pricing depends on the ordered quantity and fabric quality. The existing page refers to three quantity-based online price tiers, with more favorable pricing for larger quantities. Request a current quotation for the exact specification.

How long is one yard?

One yard equals 0.9144 meter.

Request a Quote or Sample

For an accurate quotation or sample recommendation, please provide:

• Intended garment or end use
• Required fiber composition
• Yarn-dyed or plain-dyed requirement
• Denier or construction
• Target weight and width
• Stretch direction, percentage, and recovery requirement
• Color or lab-dip reference
• Plain-dyed or coated finish
• Required functional performance and test standard
• Order quantity and quantity per color
• Packaging and shipping requirements
• Destination market
• Required test reports, certificates, declarations, or traceability documents
• Target approval and bulk-delivery dates

Contact FabricsTrades to request a quotation, fabric sample, lab dip, approval sample, available technical information, compliance documentation, testing support, or evaluation of a custom satin construction.