impression de tissus en polyester 300T avec TPU pour vêtement

Présentation du produit

This printed 300T polyester fabric is a lightweight taffeta developed primarily for coats, jackets, garment components, and other products requiring a decorative surface with additional weather protection.

The product page lists a 100% polyester composition, 68 gsm weight, 300T density, and 57–67 in. width, also shown as 150–170 cm. The original description identifies a printed design and TPU coating and describes the material as durable, waterproof, and windproof.

The legacy specification table also lists plain-dyed, silver, PA-coated, PU-coated, PVC-coated, and plain-dyed finishing routes without specifically identifying TPU or printing. Buyers should therefore confirm that the quoted bulk specification is the required printed 300T polyester construction with TPU and clarify whether the TPU is applied as a coating, film, membrane, or laminated layer.

Spécifications du produit

The listed inch and centimeter width ranges do not convert exactly at both endpoints. Buyers should confirm the contracted full width and usable cuttable width. Container quantities, production capacity, and lead times should also be reconfirmed for the selected width, finish, print, inspection standard, and order quantity.

Matériau, construction, apparence et sensation au toucher

The base material is listed as 100% polyester taffeta. Its 300T density is described on the original page as dense and tightly woven, giving the lightweight fabric a compact construction suitable for garment and coated-fabric development. Exact yarn denier, warp and weft density, weave specification, and tensile data are not provided and should be requested when required.

At 68 gsm, the fabric has a lightweight profile. This can support packable garments and products where low material weight is important, but buyers should evaluate opacity, drape, dimensional stability, seam strength, and resistance to abrasion on an approved sample.

The printed surface is intended to provide an eye-catching decorative appearance. Print artwork, color count, pattern scale, repeat dimensions, print method, face direction, and colorfastness requirements should be agreed before sample development.

The product narrative describes a TPU coating that contributes to waterproof and windproof positioning. However, the exact layer construction is not documented. Buyers should confirm the TPU type, thickness, color, placement, bonding method, waterproof target, breathability target, adhesion requirement, and wash-durability standard before quotation.

The source does not define the hand feel, gloss level, stiffness, noise, opacity, or coated-side appearance. These characteristics should be evaluated using a physical sample because printing and TPU application can materially affect the feel and drape of lightweight taffeta.

Principales caractéristiques du produit

• Lightweight 68 gsm construction: Suitable for projects that require a compact material without the weight of a heavy outerwear shell.
• Dense 300T structure: The original description presents the fabric as tightly woven and suitable for products requiring strength and durability.
• Decorative printed surface: Adds visual differentiation for fashion garments, outerwear, accessories, and coordinated product programs.
• TPU weather-protection layer: The source describes the fabric as waterproof and windproof. Required performance ratings should be established through agreed test methods.
• Custom color capability: Colors can be developed according to customer requirements.
• OEM and logo support: OEM service and logo customization are listed, subject to design, process, MOQ, and feasibility confirmation.
• Additional source-listed characteristics: Flame-retardant, anti-static, tear-resistant, and shrink-resistant properties appear in the legacy specification table. No test method, rating, treatment scope, certificate, or wash-durability result is provided, so these characteristics must be verified for the final specification.

Applications détaillées et cas d'utilisation

Lightweight Coats and Jackets

Coats and jackets are the primary applications stated in the product narrative. The 68 gsm weight can be considered for lightweight shells, packable jackets, fashion outerwear, and garment panels where a printed appearance and weather-protection layer are required.

The 300T construction provides a compact base for printing and TPU application, while the source-described waterproof and windproof characteristics support outerwear positioning. Finished-garment performance will also depend on seam construction, zippers, closures, pocket openings, and any seam-sealing process.

A lining may be appropriate when the TPU side is not intended for direct skin contact, when additional opacity is required, or when the garment needs a softer interior. Buyers should evaluate the finished fabric’s hand, breathability, moisture-vapor performance, and comfort before selecting it for high-exertion or close-to-skin garments.

Garment Linings and Layered Components

Lining is included in the source-listed applications. The lightweight weight and compact surface may be suitable for selected garment linings, internal panels, pocketing, protective layers, or layered apparel components.

Because the product is also identified as TPU coated, buyers should confirm which surface will face the wearer and whether the coating changes breathability, slip, flexibility, or sewing behavior. A TPU-treated version should not automatically be treated as equivalent to an uncoated conventional lining.

Bags, Luggage, Purses, and Totes

The product page lists bags, luggage, purses, and totes among the available uses. The printed surface can provide visual differentiation for internal compartments, lightweight exterior panels, pouches, organizers, drawstring bags, and coordinated accessories.

For load-bearing or abrasion-intensive components, the 68 gsm fabric may require reinforcement, backing, or combination with a heavier structural material. Buyers should test seam strength, tear resistance, coating adhesion, crease resistance, rubbing colorfastness, and abrasion performance against the intended product design.

Umbrellas and Lightweight Protective Products

Umbrella is included among the product tags. A dense, lightweight polyester fabric with a TPU layer may be considered for umbrella canopies or portable protective products when the required water resistance, fold endurance, colorfastness, and seam performance are confirmed.

Sampling should verify coating flexibility after repeated folding, print durability, resistance to blocking, hydrostatic pressure, and compatibility with the chosen panel-seaming process. Waterproof fabric alone does not guarantee that a finished umbrella or cover will be leak-free.

Bedding, Home Textiles, Sofa Components, and Toys

Bedding, home textiles, sofas, and toys appear in the source application list. These should be treated as conditional uses rather than universal recommendations.

The material may be considered for decorative panels, protective components, lightweight covers, internal layers, or selected non-load-bearing applications. Buyers should evaluate skin-contact requirements, breathability, abrasion exposure, flammability, chemical restrictions, cleanability, odor, and coating safety for the exact destination market. Upholstery, children’s products, and bedding programs may require different testing from garment applications.

Considérations de conception et de fabrication

• Confirm whether the required product is printed and TPU coated or whether one of the alternative PA, PU, PVC, silver, or plain-dyed finishes from the legacy table is intended.
• Request a construction sheet identifying the fabric face, coating or membrane side, yarn specification, full width, usable width, finished weight, and permitted tolerances.
• Approve the print artwork, scale, repeat, orientation, color standard, strike-off, and acceptable shade variation before bulk printing.
• Test print colorfastness to rubbing, water, perspiration, and laundering according to the intended application.
• Define any waterproof, windproof, breathability, tear-strength, shrinkage, flame-performance, or anti-static requirement using a recognized test method and minimum acceptance level.
• Confirm TPU adhesion or peel-strength requirements and evaluate coating durability after folding, sewing, washing, and expected use.
• Use trial cutting and sewing to select a suitable needle, thread, stitch length, seam allowance, and presser-foot pressure for the lightweight coated construction.
• Reinforce high-stress seams, pocket openings, attachment points, handles, and hardware areas where the fabric will be used in garments, bags, or luggage.
• If a waterproof finished product is required, evaluate stitching holes, seam tape, welding or bonding feasibility, zippers, closures, and panel junctions.
• Conduct heat trials before applying seam tape, heat-transfer graphics, bonding film, embroidery backing, or other processes that could affect the print or TPU layer.
• Confirm shrinkage and dimensional stability for every bonded or coated component rather than relying only on the polyester base fabric.
• Establish final care instructions through testing of production-quality fabric. The current source does not provide an approved washing, drying, ironing, or dry-cleaning method.

Personnalisation, échantillonnage et commande en gros

Custom colors are available according to customer requirements. OEM service and logo customization are also listed, with feasibility depending on the requested design and process. Custom printing, pattern development, coating selection, width, weight, performance level, and packaging should be confirmed during quotation rather than assumed to be standard.

Plain-color lab dips normally take 3–5 days, and approval samples normally take 7–10 days. Printed artwork, special coating development, laboratory testing, or multiple approval rounds may require a different schedule.

The listed MOQ is 2,000 meters per color. Bulk-production lead time is stated as 3–20 days, subject to order requirements. The page lists production capacity of more than 3 million meters per month and daily output of up to 150,000 meters.

Standard packing options are 50, 100, or 200 meters per roll. Packaging can also be adjusted to the buyer’s requirements. The page lists usual container quantities of approximately 200,000 meters per 20GP and 380,000 meters per 40GP; these figures should be reconfirmed because roll length, width, fabric volume, packaging method, and container-loading conditions affect the actual quantity.

Express and sea freight are listed as shipping options. Sample-order payment methods should be confirmed when requesting the sample.

Two payment descriptions appear on the source page:

• The product table states a 30% T/T advance payment and a 70% T/T balance upon receipt of the copy of the bill of lading.
• The page-level payment section states that first-time customers typically pay 30% down and 70% before shipping by T/T; repeat customers may be considered for L/C, and other terms can be negotiated.

Because these terms are not identical, the final payment schedule must be confirmed in the quotation or pro forma invoice before an order is placed.

Support à l'approvisionnement et au développement de FabricsTrades

Located in Wujiang District, Suzhou, FabricsTrades works within one of the world’s most concentrated textile manufacturing hubs. In addition to its own manufacturing capabilities, the company can coordinate with specialized weaving, dyeing, printing, coating, lamination, finishing, testing, inspection, and garment-support facilities.

If the standard 68 gsm, 300T printed polyester fabric does not fully meet the project requirements, FabricsTrades can help evaluate alternative colors, print routes, constructions, weights, widths, coating systems, or application-specific development options. Feasibility, MOQ, performance, documentation, cost, and lead time should be confirmed through sampling.

Factory visits are welcome by arrangement, and the source page states that airport or station pickup can be provided.

Règlement sur les tissus 2024-2026 & Mise à jour de conformité

Buyers supplying coated garments or related accessories to the EU market may need to review the Restriction REACH PFHxA de l'UE. Waterproof positioning does not establish the chemistry of the water-repellent treatment, and the presence of TPU does not by itself prove that a fabric is PFAS-free. Buyers should communicate any PFAS, restricted-substance, retailer RSL, or chemical-management requirement before sampling and quotation.

EU-facing apparel programs may also need to prepare for product-information and traceability requirements associated with the ESPR & Passeport produit numérique. Relevant records may include confirmed fiber composition, coating and ink information, supplier identity, production-batch traceability, durability data, and supporting chemical documentation.

Requirements vary by destination market, product category, intended use, finish, and date of sale. This page does not establish that the fabric is certified or compliant with a particular standard. When necessary, contact FabricsTrades to request available test reports, certificates, declarations, technical data sheets, traceability information, or third-party testing support for the final specification and production batch.

Foire aux questions

What is Printing 300T Polyester Fabric with TPU?

It is a lightweight 100% polyester taffeta with a listed 300T density, printed surface, and TPU layer or coating. The product is developed primarily for garments, coats, jackets, and related lightweight applications.

What are the confirmed weight and width?

The listed weight is 68 gsm. The width is stated as 57–67 inches and also as 150–170 cm. Because those ranges do not convert exactly at both endpoints, confirm the contracted full and usable widths before ordering.

Is the TPU applied as a coating or a laminated membrane?

The original narrative calls it a TPU coating, but the exact construction is not specified. Buyers should confirm whether the TPU is a coating, film, membrane, or laminated layer and request the appropriate technical specification.

Is the waterproof performance quantified?

No waterproof rating or test method is provided on the source page. Buyers should specify the required hydrostatic-pressure, spray, breathability, adhesion, and wash-durability standards and request available test reports before bulk production.

Which applications are most suitable?

The primary stated uses are coats, jackets, garments, and linings. The source also lists bags, bedding, home textiles, sofas, luggage, purses and totes, toys, and umbrellas, although these applications may require reinforcement or application-specific testing.

Combien de temps dure une immersion en laboratoire ?

A plain-color lab dip normally takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

FabricsTrades peut-il fournir un service OEM ?

Yes. OEM service is available depending on the buyer’s requirements, and logo customization is listed. Confirm the process, design, MOQ, cost, and lead time before development.

Quelle est la capacité de production ?

The page states a production capacity of more than 3 million meters per month. It also lists daily output of up to 150,000 meters. Capacity should be reconfirmed for the selected print, coating, width, and order schedule.

Quel est le délai de production en vrac ?

The listed mass-production lead time is 3–20 days. The actual schedule depends on print approval, color approval, TPU construction, testing, quantity, production loading, and packaging requirements.

Can buyers visit the factory?

Yes. Factory visits are welcome by arrangement, and the page states that airport or station pickup can be provided.

Comment est déterminé le prix du produit ?

Pricing is based on the required quality and order quantity. The source describes three online quantity-based price tiers, with larger quantities generally receiving more favorable pricing. Request a current quotation for the exact specification.

What payment terms are available?

The source lists a 30% T/T advance and 70% balance, but one section says the balance is due before shipping while another says it is due upon receipt of the bill-of-lading copy. Repeat customers may be considered for L/C, and other terms may be negotiated. Confirm the final terms in the pro forma invoice.

Quelle est la longueur d'un yard en mètres ?

Un mètre équivaut à 0,9144 mètre.

Demander un devis ou un échantillon

Pour un devis précis ou un exemple de recommandation, fournissez :

• Intended garment or product application
• Required weight, width, and usable width
• Print artwork, repeat size, color standard, and print method
• Required TPU coating, membrane, or lamination construction
• Waterproof, windproof, breathability, adhesion, or durability targets
• Flame-retardant, anti-static, restricted-substance, or retailer-testing requirements
• Required color and quantity per color
• Exigences d’emballage et d’expédition
• Marché de destination
• Required certificates, declarations, test reports, or traceability records
• Échantillon cible et dates de livraison en gros

Contact FabricsTrades to request a quotation, physical sample, lab dip, print strike-off, available test report, certificate, declaration, technical information, or custom-development evaluation.