Tissu Taslon en nylon 228 mat 100% t, pour veste, sac de tente, sac à dos, offre spéciale

Présentation du produit

This 228T matte 100% nylon Taslon fabric is a plain-dyed, 102 gsm technical woven fabric supplied at a width of 150 cm. It uses a source-listed 70D x 160D yarn specification and has a smooth matte surface with a restrained sheen.

The lightweight yet sturdy construction is intended primarily for jackets, tents, bags, and backpacks. The existing product information describes the fabric as durable, easy to handle, water- and wind-resistant, abrasion-resistant, machine-washable, and easy to care for. It also lists waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties. Because no coating chemistry, test method, performance grade, or certification is stated, buyers should confirm the exact functional specification required for their project.

Spécifications du produit

Payment-term confirmation: The detailed specification states 30% T/T in advance and 70% T/T upon receipt of a copy of the bill of lading. Another section states that first-time clients typically pay 30% down and 70% before shipping by T/T, while L/C may be considered for repeat clients and other terms may be negotiated. Confirm the applicable balance-payment milestone in the quotation and sales contract before ordering.

Matériau, construction, apparence et sensation au toucher

The 100% nylon composition supports the lightweight strength and practical durability expected from a fabric intended for outerwear and outdoor-related products. At 102 gsm, the material is light enough for packable or weight-conscious designs while retaining the sturdy character described on the existing product page.

The 228T designation describes the fabric construction and should not be confused with its 102 gsm weight. The source also lists “70D x 160D” under density; this is presented here as the yarn-denier combination. The original page does not identify which value corresponds to the warp or weft direction, so buyers requiring a complete technical specification should confirm the construction with FabricsTrades.

Its smooth matte texture produces a clean, understated appearance rather than a highly glossy synthetic look. This makes the fabric suitable for minimalist outerwear, practical travel products, utility-inspired collections, and bags where a restrained surface is preferred.

Colors can be developed according to customer requirements. The current page describes both bright shades and earthy colors and states that the dyes retain their appearance through repeated use and washing. Buyers with formal colorfastness requirements should specify the required test method and grade during sampling.

The source does not identify a coating, membrane, lamination, or water-repellent chemistry. Request this information when waterproofness, breathability, fluorinated-chemistry restrictions, or wash durability is important to the finished product.

Principales caractéristiques du produit

• Smooth matte appearance: The muted sheen gives jackets, bags, backpacks, and outdoor products a modern, understated surface.
• Lightweight but sturdy: The 102 gsm construction supports products that need manageable weight without an excessively delicate feel.
• Durability-oriented nylon construction: The page describes the fabric as durable, tear-resistant, abrasion-resistant, and suitable for repeated use.
• Weather-related performance descriptions: Waterproof, water-resistant, and wind-resistant properties are listed. Required performance levels and test standards should be confirmed for the final finish.
• Additional functional descriptions: Flame-retardant, anti-static, and shrink-resistant properties appear in the source specifications. No test method, rating, or certification is stated.
• Custom color development: Colors can be produced according to the buyer’s requirements, supported by lab dips and plain-color approval samples.
• Positionnement facile d'entretien : The existing description identifies the fabric as machine-washable and easy to clean. Final care instructions should be established after testing the approved fabric, finish, color, and completed product.

Applications détaillées et cas d'utilisation

Jackets and Lightweight Outerwear

The fabric is primarily recommended for jackets, including windbreakers, lightweight outdoor shells, casual utility jackets, and packable outer layers. Its matte surface supports both technical and everyday styling, while the 102 gsm weight helps control overall garment weight.

The source-described water and wind resistance can be useful for outerwear, but the finished garment’s performance will also depend on the selected finish, seam construction, closures, lining, and garment design. Programs requiring a stated waterproof level should confirm fabric testing and consider seam sealing or other construction controls.

A lining may be added when the designer wants a smoother interior, more structure, extra warmth, or separation between the functional finish and the wearer. Whether lining is necessary should be decided from a physical sample because opacity, breathability, and next-to-skin comfort data are not provided.

Tentes et équipements extérieurs légers

The product page specifically recommends the fabric for tents. Its light weight, sturdy nylon construction, and listed waterproof and tear-resistant properties may suit selected tent panels, covers, or other lightweight shelter components.

Tent buyers should evaluate hydrostatic resistance, tear strength, seam leakage, UV exposure, dimensional stability, and the durability of any coating or finish. Where flame-retardant performance is required, communicate the destination market, tent category, and applicable standard before sampling. No flame-retardant test result or rating is stated on the source page.

High-wear floors, reinforced corners, attachment points, and other load-bearing areas may require reinforcement or a heavier companion material. Approve the complete construction through prototype testing before bulk production.

Bags and Backpacks

The smooth matte appearance is suitable for backpack bodies, day bags, travel organizers, accessory pockets, and selected luggage panels. The fabric’s lightweight character can help reduce product weight, while the listed tear and abrasion resistance supports everyday handling.

Stress points such as shoulder-strap attachments, zipper ends, handles, base panels, and loaded seams should be reinforced according to the finished product’s intended capacity. Buyers should test seam strength, abrasion exposure, and water penetration after sewing. A fabric described as waterproof does not automatically make an assembled bag waterproof, particularly where needle holes, zippers, or unsealed seams are present.

Sportswear, Trousers, and General Garments

The product page also references sportswear, trousers, and general garment applications. Conditional uses may include warm-up trousers, shell pants, wind-resistant sportswear, utility garments, and lightweight protective outer layers.

No stretch direction or stretch percentage is stated. Garments requiring significant mobility should therefore be evaluated through fitting samples, pattern ease, gussets, articulated panels, or an alternative stretch construction. Breathability and moisture-management data are also not provided and should be tested when relevant to active use.

Costumes and Conditional Sleepwear Applications

Custom colors and the matte surface may support costume panels, performance garments, and other visual applications where a clean synthetic fabric is required.

Sleepwear appears among the product-page tags but should be treated as a conditional application. Before using the material for next-to-skin products, evaluate hand feel, breathability, thermal comfort, skin-contact requirements, finish chemistry, and wash performance. Functional finishes developed for outdoor products may not automatically suit sleepwear specifications.

Considérations de conception et de fabrication

Confirm the Functional Specification

The page lists several functions without identifying the test method, rating, or treatment. Before quotation and sampling, specify which properties are required and how they will be evaluated. Depending on the end use, relevant confirmation may include water resistance, hydrostatic pressure, spray rating, tear strength, abrasion resistance, antistatic behavior, flame retardancy, shrinkage, colorfastness, and appearance after washing.

Approve the Physical Sample

Use the lab dip and approval sample to confirm color, surface appearance, hand feel, weight, width, finish, and compatibility with the intended product. Buyers should also confirm acceptable tolerances for the 102 gsm weight and 150 cm width, including whether the quoted width is the full or usable width.

Plan Seams and Reinforcement

Needle size, point type, thread, stitch density, seam type, and seam allowance should be selected through sewing trials. Test for needle damage, seam puckering, seam slippage, and leakage where relevant. Bags, backpacks, and tent components need additional reinforcement at high-load or high-abrasion areas.

Establish Care Instructions Through Testing

Although the source describes the fabric as machine-washable and easy to care for, the final care label should reflect the approved color, functional treatment, trim package, coating or lamination if used, and completed-product test results.

Personnalisation, échantillonnage et commande en gros

• Color development: Custom colors are available according to buyer requirements.
• Lab dips: Normally completed within 3-5 days.
• Approval samples: Plain-color approval samples normally require 7-10 days.
• Service OEM et logo : OEM service is available depending on the project, and logo customization can be discussed.
• Conditionnement: Standard options are 50 mts, 100 mts, or 200 mts per roll. Other packing details can be arranged according to buyer requirements.
• Quantité minimale de commande : 2,000 meters per color.
• Bulk lead time: The source states 3-20 days for mass production. Confirm the schedule against color approvals, finish, quantity, factory loading, and testing requirements.
• Capacity: The page states production capacity of more than 3 million meters per month and daily output of up to 150,000 meters. Confirm available capacity for this exact Taslon quality when placing the order.
• Typical container loading: Approximately 40,000 mts per 20GP or 75,000 mts per 40GP.
• Expédition: Le fret express et maritime est répertorié.
• Tarif : Price depends on quantity and required quality. The online price is divided into three quantity levels, with larger quantities receiving more favorable pricing.
• Paiement: Confirm whether the order uses the 30% T/T deposit plus 70% before shipment arrangement or the 30% T/T deposit plus 70% against a copy of the bill of lading arrangement. Repeat clients may discuss L/C, and other terms may be negotiable.
• Measurement conversion: 1 yard equals 0.9144 meter.

Support à l'approvisionnement et au développement de FabricsTrades

FabricsTrades is located in Wujiang District, Suzhou, at the center of a major textile manufacturing cluster. The company operates its own 4-way stretch fabric factory and also works as a broader fabric sourcing and product-development partner. This does not mean that every fabric is made through the same production route.

For a nylon Taslon program, the team can help communicate with specialized weaving, dyeing, coating, finishing, testing, packaging, and garment-support facilities. If the standard 228T, 102 gsm, 150 cm construction does not fully meet a project, buyers can ask FabricsTrades to evaluate alternative colors, finishes, specifications, packaging, or development routes. Feasibility, MOQ, pricing, lead time, and testing should be confirmed for each request.

The existing product page also references more than 10 years of experience in related synthetic fabric lines such as polyester taffeta, satin, and Oxford fabric, together with customer experience in the Middle East, South America, and Europe.

Factory visits are welcome. Airport or station pickup may also be arranged with FabricsTrades in advance.

Règlement sur les tissus 2024-2026 & Mise à jour de conformité

Because this nylon Taslon fabric is promoted for jackets, bags, backpacks, and tents and includes waterproof or water-resistant descriptions, buyers should identify the chemistry used in any repellent, coating, or other functional finish.

• EU market and PFHxA controls: Buyers supplying EU-bound apparel, bags, or related consumer products may need to review the Restriction REACH PFHxA de l'UE. If a water-repellent finish is required, communicate the restricted-substance specification before lab-dip and bulk approval. The source product page does not identify the finish chemistry or establish PFAS status.
• Broader market requirements: Le 2024-2026 Global Textile Compliance Guide provides context for changing chemical, product-safety, traceability, labeling, and supply-chain expectations. Applicable requirements depend on the destination market, finished-product category, intended use, finish, and date of sale.

Before bulk production, buyers should confirm their legal, retailer, brand RSL, flammability, antistatic, and performance requirements. When necessary, request available technical data sheets, finish declarations, restricted-substance declarations, test reports, certificates, traceability information, or third-party testing support. Availability and relevance will depend on the final specification, color, finish, production batch, destination market, and requested test standard.

Foire aux questions

Q1: How long does a lab dip take?

A lab dip normally takes 3-5 days. A plain-color approval sample normally takes 7-10 days.

Q2: Can FabricsTrades provide OEM service?

Yes. OEM service is available depending on the buyer’s requirements, and logo customization can be discussed for the project.

Q3: What is the stated production capacity?

The source page states that monthly production capacity has reached more than 3 million meters. It also lists daily output of up to 150,000 meters. Confirm available capacity for the exact fabric, color, finish, and order schedule.

Q4: What is the bulk-production lead time?

The stated mass-production lead time is 3-20 days. The confirmed schedule will depend on order quantity, color and sample approval, finishing requirements, testing, and current production loading.

Q5: May buyers visit the factory?

Yes. Factory visits are welcome, and FabricsTrades can arrange pickup from an airport or station when coordinated in advance.

Q6: How is the product price determined?

The price depends on the order quantity and required quality or specification. The online unit price is divided into three quantity levels, and larger quantities receive more favorable pricing. Request a current quotation for the required color, finish, quantity, packaging, and delivery term.

Q7: How many meters are in one yard?

Un mètre équivaut à 0,9144 mètre.

Q8: What are the principal specifications of this nylon Taslon fabric?

The confirmed page specifications are 100% nylon composition, a 228T construction designation, 70D x 160D yarns, 102 gsm weight, 150 cm width, plain-dyed technics, and a matte surface. Colors are supplied according to customer requirements.

Q9: Is the fabric’s waterproof, flame-retardant, or anti-static performance certified?

The source page lists waterproof, flame-retardant, and anti-static properties, but it does not provide test methods, ratings, certificates, or finish chemistry. Buyers should state the required standard before sampling and request the available supporting documents or testing for the final specification.

Demander un devis ou un échantillon

Pour un devis précis ou un échantillon d’évaluation, fournissez :

• Application prévue et conception du produit fini
• Required 228T construction, 100% nylon composition, 70D x 160D yarn specification, 102 gsm weight, and 150 cm width
• Required color and lab-dip reference
• Waterproof, water-repellent, flame-retardant, anti-static, or other finish requirements
• Order quantity and number of colors
• Exigences d’emballage et d’expédition
• Marché de destination
• Required test standards, certificates, declarations, or retailer RSL
• Dates cibles d’approbation et de livraison en gros

Contact FabricsTrades to request a quotation, fabric sample, lab dip, available test report, certificate, declaration, technical information, or custom-development evaluation.