210D black rubber Oxford cloth outdoor waterproof for tent fabric shade cloth polyester fabric

Product Overview

This 210D black rubber-coated polyester Oxford fabric is a make-to-order waterproof woven fabric intended primarily for tents, solid shade covers, outdoor equipment, and related protective products.

The 210D Oxford base is described as strong, durable, and resistant to everyday wear and tear. A black rubber coating adds a water-blocking layer for products exposed to rain, moisture, or damp outdoor environments. Custom colors are available according to buyer requirements.

Because the source does not provide weight, width, coating thickness, water-pressure rating, UV performance, or other measured test results, buyers should confirm these parameters against the intended application before sampling or bulk production.

Product Specifications

The source provides two timing references: 3–20 days for mass production and normally 15–25 days after down payment and lab-dip confirmation for delivery. Buyers should confirm which timeline applies to the selected color, coating, quantity, testing program, and shipping plan.

Material, Construction, Appearance, and Hand Feel

210D Polyester Oxford Base

The 210D designation identifies the yarn denier rather than the finished fabric weight. It should not be treated as a GSM, thickness, tear-strength, or abrasion result.

The Oxford construction gives the fabric a woven structure suited to outdoor products requiring a practical balance of handling, durability, and packability. However, the source does not state the exact weave density, finished weight, thickness, tensile strength, or tear strength. These should be confirmed for load-bearing, tensioned, or repeatedly folded products.

Black Rubber Coating

The black rubber coating is the product’s main functional finish. It creates an additional barrier intended to prevent water from passing through the fabric and helps protect products used in rainy or damp conditions.

The precise coating chemistry, coating weight, adhesion, flexibility, odor, temperature resistance, and waterproof rating are not stated. Buyers should also confirm whether “black” describes the coating or backing side, the visible face color, or both.

Appearance and Handling

Coating can affect the fabric’s stiffness, drape, air permeability, folding behavior, sewability, and resistance to flex cracking. These properties should be evaluated on a sample made to the intended bulk specification.

If the fabric will be folded, rolled, tensioned, washed, printed, bonded, or stored in hot or humid conditions, request a representative coated sample and confirm the relevant performance requirements before ordering.

Key Product Features

• Waterproof coated construction: The source describes the fabric as waterproof, with the black rubber coating providing an additional barrier against rain and dampness.
• Durable Oxford base: The 210D Oxford material is described as strong, durable, and resistant to wear and tear during regular handling.
• Outdoor-oriented performance: The fabric is intended for tents, shade covers, outdoor gear, and other products requiring a coated protective textile.
• Custom color availability: Colors can be produced according to customer requirements. Lab-dip approval should be completed before bulk production.
• Practical care characteristics: The source describes the fabric as machine washable and quick-drying. Final care instructions should still be validated for the selected coating, color, and finished product.
• Make-to-order sourcing: The fabric can be developed around confirmed color and functional requirements, subject to feasibility, MOQ, testing, and quotation.
• Sampling and OEM support: Free A4 reference samples, lab dips, plain-color approval samples, OEM service, and logo customization are available under the stated conditions.

Detailed Applications and Use Cases

Tents and Outdoor Shelters

This fabric is primarily presented for tent production. Its 210D Oxford construction offers a durable woven base, while the black rubber coating supplies the stated waterproof function.

Potential components include tent flysheets, sidewalls, roof panels, equipment vestibules, and selected ground-contact panels. Suitability for each component depends on the required water pressure, tear strength, seam construction, weight, and coating durability.

Needle holes can interrupt the water barrier, so tent manufacturers should evaluate seam tape, liquid seam sealant, covered seams, or another compatible sealing method. Before bulk production, confirm:

• Hydrostatic-head or water-column requirement
• Tensile and tear strength
• Coating adhesion and flex resistance
• Seam-sealing compatibility
• Finished weight and width
• UV and weathering requirements
• Dimensional stability and shrinkage
• Colorfastness after light, water, and rubbing exposure

A fabric suitable for a lightweight flysheet may not automatically meet the requirements of a tent floor or heavily tensioned shelter panel.

Waterproof Shade Covers, Canopies, and Awning-Type Panels

The coated woven construction may be used for solid shade covers, temporary canopies, rain covers, or similar overhead panels where both shade and water protection are required.

This product should not automatically be treated as an open-mesh shade net. Buyers requiring ventilation, controlled shade percentage, or wind permeability should confirm whether a solid waterproof Oxford construction is appropriate.

For tensioned shade or canopy products, evaluate UV exposure, tensile strength, tear propagation, dimensional stability, coating aging, and resistance around grommets or attachment points. Corners, hems, straps, eyelets, and load-bearing edges may require reinforcement.

Permanent architectural or high-wind installations require engineering and testing beyond the information available on the current product page.

Outdoor Gear and Protective Covers

The fabric may also be evaluated for rain covers, equipment covers, storage covers, outdoor bags, utility pouches, and other protective gear.

The Oxford base supports products exposed to repeated handling, while the coated side helps protect contents from water or damp environments. For bags and fitted covers, confirm abrasion resistance, seam strength, coating flexibility, and whether the material tolerates repeated folding without cracking or delamination.

If the finished product will contact painted, polished, or sensitive surfaces, evaluate coating transfer, rubbing fastness, odor, and blocking during warm storage.

Sofa and Furniture Protection

The source page includes a sofa application tag. A practical conditional use would be waterproof sofa covers, furniture dust covers, outdoor furniture covers, or removable protective panels.

Direct upholstery use should be confirmed through sampling because the page does not provide seating-abrasion performance, flex resistance, surface comfort, breathability, colorfastness, or flame-performance data. The rubber-coated side may also require a lining or barrier layer where it contacts furniture surfaces.

Design and Manufacturing Considerations

Waterproof Seams

The fabric’s waterproof coating does not automatically make a sewn product waterproof. Stitching produces needle holes, so manufacturers should select an appropriate seam construction and test the finished seam under the required water pressure.

Seam tape, seam sealant, welding, or bonding should only be used after compatibility with the actual rubber coating has been confirmed.

Cutting and Edge Finishing

Evaluate fraying and coating separation during cutting. Depending on the approved sample, suitable options may include bound edges, folded hems, coated-fabric seam constructions, or reinforced attachment areas.

For shade covers and tent panels, reinforce corners, webbing points, grommets, zippers, and other areas subjected to concentrated force.

Needle and Thread Selection

Needle size, point type, thread construction, stitch density, and presser-foot pressure should be selected through production trials. Excessive stitch density can perforate a waterproof coating and reduce tear resistance along the seam.

Color and Surface Approval

Approve the lab dip under the intended lighting conditions. The visible color may differ between the woven face and black-coated side, so confirm face color, backing color, shade tolerance, and coating coverage separately.

For large panels assembled from multiple rolls, request a consistent production lot or agree on roll-to-roll shade-tolerance requirements.

Printing, Bonding, and Additional Finishes

The source confirms custom colors but does not confirm printing, lamination, flame-retardant treatment, UV stabilization, or additional water-repellent chemistry. If any of these are required, communicate them before quotation and request feasibility testing.

Printing inks, adhesives, seam tapes, and other added materials must be checked for adhesion and compatibility with the coated surface.

Care and Cleaning

The source describes the fabric as machine washable and quick-drying. Actual care performance can vary with the selected coating, color, seam construction, accessories, and finished-product design.

Run a trial wash on the approval sample before assigning a care label. Evaluate coating cracking, delamination, color change, shrinkage, surface tack, and waterproof retention after washing.

Recommended Pre-Production Testing

Testing should be selected according to the finished product and destination market. Buyers may wish to specify:

• Finished weight, width, and coating weight
• Hydrostatic head or water-column resistance
• Spray or surface-wetting performance, if required
• Tensile and tear strength
• Abrasion resistance
• Coating adhesion and flex-cracking resistance
• Seam strength and seam leakage
• UV and accelerated-weathering performance
• Colorfastness to light, rubbing, and water
• Dimensional stability and wash performance
• Restricted-substance testing
• Odor, blocking, or migration testing where relevant

No measured grade or pass result should be assumed from the term “waterproof.” Provide the target test method, acceptance limit, finished-product use, and destination market before sampling and quotation.

Customization, Sampling, and Bulk Ordering

This product is supplied on a make-to-order basis. Available support includes customer-specified colors, OEM development, and logo customization, subject to project requirements and feasibility.

A free A4 sample can be provided for reference. Buyers should confirm whether courier charges apply and whether the A4 sample represents the intended bulk color, coating, weight, and performance.

The stated sampling schedule is:

• Lab dip: normally 3–5 days
• Plain-color approval sample: normally 7–10 days
• Mass production: 3–20 days according to the existing FAQ
• Normal delivery schedule: 15–25 days after the down payment is ready and the lab dip is confirmed

Lead time can vary with quantity, custom color, coating specification, testing, sample approval, and production scheduling. Confirm the final timeline in the quotation or order confirmation.

The current page does not state an MOQ. Request the applicable MOQ for the required color, coating, width, packaging, and customization.

Pricing depends on required functions, quality, and quantity. The existing online price is organized into three quantity brackets, with more favorable pricing generally available for larger orders.

For first-time clients, the typical large-order payment arrangement is 30% down payment and 70% before shipping by T/T. L/C may be considered for repeat clients. L/C at sight and other terms can be negotiated in advance.

Express and sea freight are available. Confirm roll dimensions, roll length, packing method, shipping marks, labeling, total volume, and preferred Incoterm before shipment.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, at the center of a major textile manufacturing cluster. In addition to its own manufacturing capabilities, the company can coordinate with specialized weaving, dyeing, coating, finishing, printing, and product-support facilities in the surrounding supply chain.

If this standard 210D black rubber-coated Oxford fabric does not fully meet a project requirement, the team can help evaluate alternative colors, widths, weights, constructions, coatings, finishes, or related outdoor-fabric options. Feasibility, MOQ, lead time, testing, and documentation depend on the final specification and should be confirmed before development.

Factory visits are welcome, and airport or station pickup may be arranged.

2024–2026 Fabric Regulations & Compliance Update

Because this is a coated waterproof textile, buyers supplying finished products to the EU should review the EU REACH PFHxA Restriction.

Under REACH Annex XVII Entry 79, PFHxA-related limits apply from 10 October 2027 to certain non-apparel textiles intended for the general public. The applicable date, product scope, exemptions, and testing requirements depend on the classification and intended use of the finished article. Construction textiles are exempt from this specific entry, but not every tent, shade cover, or outdoor product will necessarily qualify for that exemption.

The description “black rubber coating” does not establish whether the product contains or excludes PFAS, and it is not proof of REACH compliance. Additional water-repellent treatments, coating ingredients, processing aids, membranes, and cross-contamination may also affect the finished specification.

For EU-bound or retailer-controlled programs, buyers should communicate their restricted-substance requirements before sampling and quotation. When necessary, request:

• Coating and finishing-agent SDS or TDS information
• A supplier restricted-substance or PFAS declaration tied to the exact specification
• Lot- and color-specific test reports
• Details of any additional water-repellent treatment
• Coating, membrane, or lamination declarations
• Traceability and production-batch records
• Third-party testing support using the buyer’s required method

Available documents depend on the final construction, coating, color, production batch, destination market, and testing request. Buyers remain responsible for confirming the legal and retailer requirements applicable to their finished product before bulk production.

Frequently Asked Questions

Is this 210D Oxford fabric waterproof?

Yes. The source describes the fabric as waterproof and identifies the black rubber coating as the layer that helps prevent water from passing through the material. No hydrostatic-head or water-column result is stated, so buyers should provide the required waterproof standard and request testing before bulk approval.

Can this fabric be used for tents?

Yes, it is primarily presented as a tent fabric. The appropriate tent component depends on the required weight, tear strength, waterproof rating, UV exposure, seam design, and coating durability. Test a representative sample before using it for flysheets, sidewalls, floors, or heavily tensioned panels.

Is it suitable for breathable mesh shade cloth?

The current product is presented as coated Oxford fabric, and the source does not state an open-mesh construction or shade percentage. It is better suited to evaluation as a solid waterproof shade cover or canopy panel. Buyers requiring airflow or controlled shade density should confirm the necessary construction before ordering.

How long does a lab dip take?

A lab dip normally takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service is available depending on the buyer’s requirements, and logos can be customized on the products. Confirm the logo method, placement, artwork, MOQ, and sample-approval requirements before production.

What is the monthly production capacity?

The stated production capacity is more than 3 million meters per month. Available capacity for a specific order should be confirmed according to the selected coating, color, specification, and production schedule.

What is the delivery time?

The existing FAQ states 3–20 days for mass production. Elsewhere, the page states a normal delivery schedule of 15–25 days after the down payment is ready and the lab dip has been confirmed. Confirm the applicable production and shipment schedule for each order.

May buyers visit the factory?

Yes. Factory visits are welcome, and airport or station pickup may also be arranged.

How is the price determined?

The price depends on quantity, quality, and required functions. The online unit price is divided into three quantity brackets, and larger quantities generally receive more favorable pricing. Request a current quotation based on the exact color, coating, width, performance, packaging, and order quantity.

How long is one yard of fabric?

One yard equals 0.9144 meter.

What should be confirmed before placing an order?

Confirm the intended application, polyester content, weight, usable width, coating chemistry, coating side, waterproof rating, color, UV requirement, test standards, MOQ, packaging, quantity, destination market, compliance documents, and required delivery date. A representative approval sample should be tested before bulk production when performance is critical.

Request a Quote or Sample

For an accurate quotation or custom-development evaluation, please provide:

• Intended product and application
• Required fiber composition
• Weight or GSM
• Usable width
• Face color and coating color
• Coating type and waterproof requirement
• UV, flame-retardant, or other functional requirements
• Required test method and acceptance level
• Order quantity and expected MOQ
• Packaging and shipping requirements
• Destination market
• Required certificates, declarations, or test reports
• Target sample and bulk-delivery dates

Contact FabricsTrades to request a quotation, free A4 reference sample, lab dip, approval sample, available technical information, supporting documents, third-party testing assistance, or a custom coated-fabric development review.