Chinese Factory Price polyester taffeta fabric for supermarket bag

Product Overview

This 100% polyester taffeta is developed primarily for reusable supermarket bags and other lightweight bag applications. The source range includes 38–60 GSM weights, 170T–210T density options, customer-specified colors, and several dyeing or coating routes.

The fabric is described as lightweight, durable, and convenient to carry. The final performance will depend on the selected density, weight, coating, sewing construction, reinforcement, and intended load. Buyers should approve a representative sample and test the finished bag design before bulk production.

Plain-dyed fabric is available, together with silver, PA, PU, and PVC-coated options. Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are also listed on the source page. These properties should be treated as specification-dependent requirements rather than automatically included characteristics. Confirm the required finish, test method, performance level, and supporting documentation during quotation.

Product Specifications

Material, Construction, Appearance, and Hand Feel

The product is identified as 100% polyester taffeta. Four density references—170T, 180T, 190T, and 210T—are available, but the page does not publish the yarn denier, warp-and-weft construction, or the method used to calculate the “T” value. Buyers requiring a specific tensile, tear, seam-slippage, or coverage result should confirm the full construction before sampling.

The 38–60 GSM range supports lightweight product development, but different weights and densities may produce different levels of coverage, stiffness, durability, and sewing performance. These differences should be evaluated using the exact quality intended for bulk production.

Surface appearance and hand feel can also vary substantially between plain-dyed, silver-coated, PA-coated, PU-coated, and PVC-coated versions. The page does not specify gloss, opacity, coating weight, stiffness, coating side, or coating chemistry. Request a physical sample, color approval, and finish specification before confirming an order.

Key Product Features

• Lightweight construction: The 38–60 GSM range is intended for products where portability and low material weight are commercially important.
• Multiple density choices: 170T, 180T, 190T, and 210T options allow buyers to evaluate different constructions for the target product.
• Custom colors: Colors can be developed according to the buyer’s requirements, subject to lab-dip and approval procedures.
• Multiple finish routes: Buyers can discuss plain-dyed, silver-coated, PA-coated, PU-coated, or PVC-coated versions.
• Functional-development options: Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are listed. The required property must be linked to an agreed construction, finish, testing standard, and approval sample.
• Flexible packing: Rolls of 50, 100, or 200 meters are available, with other packing details subject to confirmation.
• Factory-linked pricing: Quotations are based on quantity and the required specification, with more favorable pricing generally available at larger volumes.

Detailed Applications and Use Cases

Reusable Supermarket and Shopping Bags

This is the product’s primary stated application. Its lightweight construction can help reduce the weight and storage volume of foldable or reusable shopping bags. Plain-dyed versions can be considered for basic color-led programs, while coated versions may be evaluated when the design requires a different surface, additional structure, or water-resistant performance.

The source describes the fabric as strong and durable enough for grocery-carrying applications, but no load rating or laboratory test value is published. The finished bag’s carrying capacity will also depend on fabric density, coating, seam type, thread, handle material, handle attachment, reinforcement, bag dimensions, and workmanship. Approve a finished prototype and conduct application-specific load, seam, and durability testing before bulk production.

Purses, Totes, Pouches, and Promotional Bags

The material may be used for lightweight totes, drawstring bags, storage pouches, promotional bags, and internal bag components. Its low weight can support portable or foldable designs. Where printing, heat transfer, lamination, or bonding is planned, confirm compatibility with the selected dye or coating because surface treatments can affect ink adhesion and processing temperature.

For higher-wear bags, test abrasion resistance, tear strength, seam slippage, and handle attachment on the exact bulk specification. Reinforcement or a heavier construction may be required at stress points.

Luggage and Bag Linings

Polyester taffeta can be evaluated as a lightweight lining for luggage, backpacks, handbags, organizers, and accessory compartments. Buyers should confirm opacity, hand feel, colorfastness, abrasion performance, coating durability, and seam behavior based on the intended price segment and expected use.

If the fabric will contact zippers, frames, hardware, or rough stored items, a sample should be tested for snagging, puncture resistance, and repeated abrasion.

Garment, Coat, Jacket, Sleepwear, and Bridal Linings

The page lists garment and lining uses and tags the product for coats, jackets, sleepwear, and wedding or bridal applications. These should be treated as specification-dependent uses. A 38–60 GSM plain-dyed quality may be considered where a lightweight lining is required, but buyers must confirm surface feel, breathability, opacity, static behavior, drape, noise, colorfastness, and wash-care compatibility.

For garments worn next to the skin, approve the hand feel and chemical requirements of the final quality. For bridal or occasionwear, check shade consistency, luster, transparency, and compatibility with the face fabric. Coated versions may not provide the same comfort or drape as plain-dyed qualities.

Umbrellas and Water-Resistant Accessories

Umbrellas are included among the page’s application tags, and waterproof performance is listed as a feature. Suitability will depend on the exact coating, hydrostatic or rain-test requirement, seam design, colorfastness, UV exposure, and finished-product construction.

Do not assume that every plain-dyed or coated version is waterproof. Communicate the test standard and target value before sampling, then approve the finished umbrella or accessory under its intended conditions.

Bedding, Home Textiles, Sofa Components, and Toys

Bedding, home textiles, sofas, and toys are also listed as applications. Because the published fabric weight is 38–60 GSM, buyers should determine whether the material is intended as a lining, dust cover, inner layer, decorative component, or another lightweight part rather than the primary load-bearing or abrasion surface.

For upholstery, bedding, children’s products, or toys, confirm the relevant mechanical, flammability, restricted-substance, colorfastness, and end-market requirements. These applications should proceed only after sampling and product-specific testing.

Design and Manufacturing Considerations

• Select the exact construction: Approve the required GSM, density, finished width, color, and finish as one complete specification.
• Engineer the finished bag: Grocery-load performance depends on handles, reinforcement, seams, stitch density, thread, and workmanship as well as the fabric.
• Control coating-related processing: PA, PU, PVC, and silver-coated versions may react differently to sewing, folding, printing, bonding, heat, and repeated flexing.
• Confirm usable width: The published 57–67-inch and 150–170 cm ranges are not exact equivalents. Confirm the finished and usable cutting width.
• Check edge behavior: Trial the cutting and seam-finishing method on the selected quality, especially when the product will be repeatedly folded or loaded.
• Approve color and finish: Use a lab dip, approval sample, and—where necessary—a bulk shade or production sample before cutting.
• Define functional claims: If waterproof, flame-retardant, anti-static, tear-resistant, or shrink-resistant performance is required, specify the target test method and acceptance criteria before quotation.
• Confirm care requirements: Washing, drying, ironing, solvent exposure, and coating-care instructions are not published and should be established for the final construction.
• Test the finished article: Fabric approval alone does not verify the safety or durability of the finished bag, garment, umbrella, toy, or home-textile product.

Customization, Sampling, and Bulk Ordering

The standard MOQ is 2,000 meters per color. Custom colors are available according to the buyer’s requirements, with lab dips normally completed in 3–5 days. Plain-color approval samples normally require 7–10 days.

OEM service is available depending on the project, and logo customization can be discussed. Buyers should confirm the logo method, artwork, size, placement, color, substrate compatibility, minimum quantity, and approval procedure.

Bulk production is listed as 3–20 days. The actual schedule should be confirmed according to quantity, color, coating, finishing route, testing, packing, and production availability. Published capacity is up to 150,000 meters per day and more than 3 million meters per month.

Standard roll lengths are 50, 100, or 200 meters, while custom packing can be arranged. Usual container-loading references are approximately 200,000 meters for a 20GP and 380,000 meters for a 40GP. Final loading quantity must be recalculated for the selected GSM, width, roll length, packing dimensions, and container restrictions.

Express and sea freight are available. For first orders, the usual payment structure is a 30% deposit and 70% balance by T/T. Because the existing page gives two different descriptions of when the balance is due, confirm the payment milestone in the final quotation or pro forma invoice. L/C may be considered for repeat clients, and other terms can be negotiated.

Pricing depends on the selected quality/specification and order quantity. The source refers to three quantity-based online price tiers, with larger quantities generally receiving more favorable pricing. Request a current quotation for the exact construction rather than relying on a general online price.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, within a major textile manufacturing cluster. In addition to operating its own 4-way stretch fabric factory, the company works as a fabric sourcing and product-development partner with access to specialized weaving, dyeing, printing, coating, finishing, and garment-support resources.

The source page states more than 10 years of experience with polyester taffeta, satin, Oxford, and related fabrics, together with customer experience in the Middle East, South America, and Europe.

If a standard taffeta quality does not fully match the intended bag, lining, umbrella, garment, or home-textile program, FabricsTrades can help assess alternative densities, weights, colors, coating routes, packing methods, and development options. Availability and feasibility must be confirmed for each project.

Factory visits are welcome, and airport or station pickup can be discussed in advance.

2024–2026 Fabric Regulations & Compliance Update

For coated or waterproof fabric programs intended for the EU, buyers may need to review the evolving EU REACH Universal PFAS Restriction. The universal proposal is not presented here as final law, and this product page does not establish that any version of the fabric is PFAS-free or REACH compliant. Before sampling, specify any restricted-substance or non-fluorinated chemistry requirement and request available coating disclosures, declarations, technical data, and appropriate test support.

Buyers importing fabric or finished bags into the EU should also review the EU Packaging and Packaging Waste Regulation (PPWR). Its immediate relevance may include the roll wrapping, polybags, cartons, labels, pallet materials, and other packaging used for shipment. Whether a particular finished shopping bag falls within a regulated packaging category should be assessed by the responsible buyer or importer.

Requirements vary by destination market, finished-product category, intended use, coating chemistry, customer specification, and date of sale. Before bulk production, communicate the applicable retailer RSL, legal requirements, test methods, and documentation needs. Available reports, certificates, declarations, traceability information, or third-party testing support may depend on the final specification and production batch.

Frequently Asked Questions

How long does a lab dip take?

A lab dip normally takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the project requirements, and logo customization can be discussed. Confirm the logo method, artwork, placement, quantity, and approval procedure.

What is the production capacity?

The published monthly production capacity is more than 3 million meters. The page also states daily output of up to 150,000 meters; capacity for a specific order should be confirmed against the selected quality and production schedule.

What is the bulk-production lead time?

The listed bulk-production time is 3–20 days. The final lead time depends on quantity, color, coating, testing, packing, and current production availability.

May I visit the factory?

Yes. Factory visits are welcome, and airport or station pickup can be discussed in advance.

How is the product price determined?

Pricing depends on the order quantity and the required quality/specification. The source refers to three online quantity tiers, with larger quantities generally receiving more favorable pricing. Request a current quotation for the exact fabric and finish.

How long is one yard in meters?

One yard equals 0.9144 meter.

Are waterproof and other functional properties standard?

Not necessarily. Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are listed on the source page, but the exact combination is not defined for every construction. Specify the required property and test standard before sampling.

Which finished width should I order?

The page publishes 57–67 inches and 150–170 cm, but these ranges are not exact unit equivalents. Confirm the required finished and usable width before placing an order.

Request a Quote or Sample

For an accurate quotation, provide your intended application, required GSM, density, usable width, color, finish or coating, quantity per color, roll length, packing method, destination market, testing standard, documentation requirements, and target delivery date.

Contact FabricsTrades to request a quotation, lab dip, sample, available technical information, test report, certificate, declaration, compliance-document review, or custom-development evaluation.