Good quality Cheaper price Microfiber Polyester Fabric for dye sublimation print

Product Overview

This product is presented as a 100% polyester microfiber fabric for dye-sublimation printing. It is available in a 90–130 gsm weight range, with 220T, 230T, and other density options, custom colors, and several plain-dyed or coated finish routes.

The current product information also refers to the material as “polyester peach-skin fabric” and “poly satin fabric.” Because peach-skin and satin constructions can differ substantially in surface texture, luster, drape, and end-use performance, buyers should confirm the exact base fabric before ordering. Request a physical sample, construction details, and an approved specification sheet for the version being quoted.

Polyester is commonly used for disperse-dye sublimation printing, but print definition, color yield, hand feel, dimensional stability, and coating compatibility depend on the selected construction and finish. A production-representative print trial is recommended before bulk approval.

Product Specifications

Specification	Available Product Information
Source Product Name	Good Quality Cheaper Price Microfiber Polyester Fabric for Dye Sublimation Print
Natural Product Name	100% Polyester Microfiber Fabric for Dye-Sublimation Printing
Product Category	Polyester fabric
Composition	100% polyester
Fabric Identity	The title specifies microfiber polyester; the description also uses “peach-skin fabric” and “poly satin.” Confirm the exact construction with FabricsTrades.
Density	220T, 230T, and other options
Weight	90–130 gsm
Width	57″–67″ / 150–170 cm, as listed on the source page
Color	According to the customer’s requirements
Dyeing and Finish Options	Plain dyed; silver, PA, PU, or PVC coated; or plain-dyed fabric without coating
Printing Application	Presented for dye-sublimation printing; confirm print performance on the selected construction and finish
Source-Listed Properties	Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant
Main Source-Listed Uses	Bags, bedding, linings, garments, home textiles, sofas, and luggage
MOQ	2,000 meters per color
Lab-Dip Time	Normally 3–5 days
Plain-Color Approval Sample	Normally 7–10 days
Bulk-Production Lead Time	3–20 days
Daily Output	Up to 150,000 meters
Monthly Production Capacity	More than 3 million meters
Standard Roll Packing	50, 100, or 200 meters per roll
Custom Packing	Available according to the buyer’s requirements
Indicative Container Quantity	Approximately 110,000 meters per 20GP and 220,000 meters per 40GP under usual packing conditions
Shipping Methods	Express and sea freight
Unit Conversion	1 yard = 0.9144 meter
Customization	Custom colors; OEM service and logo customization subject to the buyer’s requirements and feasibility
Payment	Payment conditions vary; see the ordering section below and confirm the controlling terms on the quotation or pro forma invoice

The listed inch and centimeter width ranges are not exact equivalents at both endpoints. Buyers should therefore confirm the nominal width, usable width, and permitted width tolerance for the selected construction.

Material, Construction, Appearance, and Hand Feel

100% Polyester Base

The confirmed fiber composition is 100% polyester. This makes the product relevant to dye-sublimation programs because polyester can accept disperse dyes under heat-transfer conditions. The final result still depends on the fiber, fabric construction, pretreatment, coating, transfer paper, ink, temperature, dwell time, and pressure used in production.

The page does not provide the yarn denier, weave specification, microfiber definition, or filament structure. Buyers requiring an exact microfiber construction should request the yarn specification, density basis, fabric construction, and technical data before approval.

Peach-Skin and Satin Descriptions Require Confirmation

The product description contains two different fabric identities:

• A peach-skin version would normally be evaluated for its softly textured or lightly brushed surface, subdued appearance, and comfortable hand.
• A satin version would normally be evaluated for a smoother surface, greater luster, fluidity, and possible seam-slippage considerations.

These are general construction differences, not confirmation that both characteristics exist in the same fabric. FabricsTrades should confirm whether the quoted article is microfiber peach skin, polyester satin, a satin-based peach-finished fabric, or another construction.

Weight, Density, and Width

The 90–130 gsm range covers relatively lightweight to medium-light fabric options. The exact drape, opacity, strength, and suitability for upholstery, bags, outerwear, or lining applications will vary within that range.

Available density information is listed as 220T, 230T, and other options. Buyers should confirm what the “T” value represents for the selected fabric and whether the quoted specification includes a tolerance.

The source lists a width of 57″–67″ / 150–170 cm. Confirm whether this is the full fabric width or usable width after finishing, coating, or edge removal.

Finish and Functional Claims

The page lists plain-dyed fabric as well as silver, PA, PU, and PVC coating options. These finishes can produce different surface effects, barrier properties, hand feel, breathability, print response, weight, and care requirements.

Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are also listed. However, no test method, performance grade, measured result, certification, or applicability to a particular construction is provided. These properties should not be treated as standard across every version.

If any functional performance is required, communicate the end-use standard before sampling. Ask FabricsTrades to confirm:

• Whether the property is inherent, finish-dependent, or available only by custom development
• Which fabric construction and coating were tested
• The applicable test method and required result
• Whether an available test report represents the quoted specification and production batch
• Whether additional third-party or pre-shipment testing is needed

Key Product Features

• Flexible specification range: Available information includes 90–130 gsm weights, 220T and 230T densities, and a listed 57″–67″ / 150–170 cm width range.
• Custom color development: Colors can be produced according to the customer’s requirements, supported by lab dips and plain-color approval samples.
• Multiple finishing routes: Buyers can discuss plain-dyed, silver-coated, PA-coated, PU-coated, or PVC-coated versions.
• Dye-sublimation positioning: The product is presented for heat-transfer sublimation printing, subject to confirmation through a trial using the intended construction and finish.
• Commercial production support: The source lists output of up to 150,000 meters per day and monthly capacity exceeding 3 million meters, with actual availability depending on specification and production scheduling.
• OEM support: OEM service and logo customization may be evaluated according to the buyer’s project requirements.

Detailed Applications and Use Cases

Dye-Sublimated Garments and Printed Textile Components

The polyester composition makes this fabric a candidate for dye-sublimated garment panels, linings, bag panels, and selected home-textile components. Sublimation can produce an integrated print without a heavy surface ink layer, but the exact color yield and definition must be evaluated on the approved fabric.

A peach-finished surface may soften fine printed details, while a smoother satin construction may produce a different visual effect and luster. Coatings can also affect transfer efficiency and surface appearance. Buyers should approve a print strike-off or production-representative sample before bulk printing.

Garments and Linings

The 90–130 gsm range may suit linings and lightweight garment components where low bulk and manageable drape are needed. The current page also associates the product with garments, coats, jackets, sleepwear, and wedding or bridal applications.

Suitability depends on the confirmed construction:

• A peach-skin version may be considered where a softer, more subdued surface is preferred.
• A satin version may be considered for smooth linings or decorative apparel requiring more luster.
• Coated versions may be less suitable for applications that require softness or breathability.

Opacity, static behavior, seam slippage, colorfastness, skin-contact requirements, and care performance are not provided. Evaluate these factors through sampling and testing before garment approval.

Bags, Purses, Totes, and Luggage

The source specifically recommends the fabric for bags and luggage, and the product taxonomy also includes purses and totes. Plain-dyed or coated versions may be considered for decorative panels, linings, lightweight shells, or printed components.

For load-bearing areas, corners, handles, and high-abrasion zones, the selected 90–130 gsm fabric may require reinforcement, backing, lamination, or a heavier alternative. Confirm tear strength, abrasion resistance, seam strength, coating adhesion, and water resistance according to the finished product’s requirements.

Bedding and Home Textiles

The page lists bedding and home textiles among the intended applications. The fabric may be evaluated for printed decorative components, lightweight covers, linings, or other applications compatible with its final hand and finish.

For products with direct skin contact, confirm the coating route, breathability, colorfastness, wash performance, restricted-substance requirements, and applicable safety documentation. Coated variants should not automatically be treated as equivalent to an uncoated bedding fabric.

Sofa and Upholstery Programs

Sofa use is listed on the page, but the available weight range is lighter than many primary upholstery constructions. The material may be more suitable for decorative layers, linings, backing components, printed accents, or specially engineered laminated constructions.

Before specifying it for exposed seating surfaces, evaluate abrasion resistance, seam strength, pilling, dimensional stability, colorfastness, coating durability, and any market-specific flammability requirement. Request test evidence for the exact production construction rather than relying on the general “flame-retardant” description.

Umbrellas, Protective Products, and Industrial Uses

The product taxonomy associates the fabric with umbrella fabric and industrial wear. These should be treated as conditional applications. An umbrella or protective-textile program may require verified hydrostatic resistance, coating adhesion, UV performance, tear strength, dimensional stability, and weathering performance.

Industrial or protective clothing may also be subject to application-specific safety standards. The source does not provide a protective-performance classification, so the fabric must not be presented as certified PPE without the required testing and documentation.

Toys and Decorative or Occasion Products

Toy, home-decor, and wedding or bridal uses appear in the current page taxonomy. The smooth printable polyester surface may support decorative concepts, but the approved construction must meet the end product’s appearance, hand, safety, durability, and destination-market requirements.

For toys or children’s products, buyers should communicate the applicable chemical and physical safety standards before sampling. For bridal or occasion products, first confirm whether the actual fabric is satin, peach-finished, or another microfiber construction, as this will materially affect luster, drape, and styling.

Design and Manufacturing Considerations

• Confirm the fabric identity: Approve the exact construction as peach skin, satin, satin with a peach finish, or another microfiber polyester article.
• Run a sublimation trial: Test the approved bulk-representative fabric with the intended ink, paper, heat, pressure, and dwell time.
• Specify the printed face: Brushed, smooth, coated, and reverse surfaces may produce different results.
• Approve color correctly: Use the stated 3–5-day lab-dip process and 7–10-day plain-color approval-sample process where applicable. Ask whether a separate printed strike-off is available.
• Confirm usable width: Establish the nominal and usable width, including any coating-edge or finishing allowance.
• Test coated variants: Coating type can change hand feel, breathability, stiffness, print performance, bonding behavior, and care requirements.
• Develop seams by sample: Needle, thread, stitch density, seam allowance, edge finish, and reinforcement should be selected after testing the confirmed construction.
• Evaluate lining or backing: Lightweight, translucent, load-bearing, or upholstery applications may require lining, reinforcement, or lamination.
• Set performance standards in advance: Waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant requirements should be defined by an agreed test method and acceptance level.
• Establish care instructions: No washing, drying, ironing, or dry-cleaning instructions are provided. Final care labeling should be based on the finished fabric, print, coating, and garment or product construction.

Customization, Sampling, and Bulk Ordering

Customization

The source page supports custom colors and states that OEM service is available depending on the buyer’s requirements. Logo customization may also be discussed. Buyers should confirm whether a logo is to be printed on the fabric, applied to the finished product, or used on packaging.

Available finish routes listed on the page include plain dyed, silver coated, PA coated, PU coated, and PVC coated. Feasibility, MOQ, pricing, hand feel, performance, and lead time may differ by finish.

MOQ and Sampling

• Bulk MOQ: 2,000 meters per color
• Lab-dip time: normally 3–5 days
• Plain-color approval sample: normally 7–10 days
• Bulk lead time: 3–20 days

The 3–20-day production range is broad. Confirm the applicable schedule for the selected weight, density, color, coating, quantity, testing requirement, and production slot.

The current page displays sample-payment information as a graphic but does not state the accepted methods in readable text. Confirm the sample cost, freight charge, payment method, sample size, and refund or credit policy before payment.

Capacity

The source lists:

• Daily output of up to 150,000 meters
• Monthly production capacity of more than 3 million meters

Capacity does not by itself guarantee immediate availability. Confirm greige availability, finishing-line capacity, color schedule, inspection requirements, and the delivery date on the order document.

Packing and Container Loading

Fabric can be packed in 50-, 100-, or 200-meter rolls. Custom packing details may be arranged according to the buyer’s requirements.

The page gives indicative quantities of approximately 110,000 meters per 20GP and 220,000 meters per 40GP under usual packing conditions. Actual loading depends on fabric weight, roll length, roll diameter, packaging, palletization, and container restrictions.

Shipping

Listed shipping methods are express and sea freight. Confirm the Incoterm, export port, freight responsibility, insurance, documentation, and delivery schedule with FabricsTrades.

Payment Terms

The source contains two different descriptions of the T/T balance-payment timing:

• The large-order summary states that first-time clients normally pay 30% as a down payment and 70% before shipping.
• The detailed description states 30% advance payment and 70% upon receipt of a copy of the bill of lading.

For repeat clients, L/C may be considered, and other payment terms may be negotiated. Because the balance-payment timing differs across the page, the controlling terms must be confirmed on the quotation, sales contract, and pro forma invoice.

Pricing

Pricing is determined according to quantity and quality requirements. The current page refers to three online quantity-based price brackets and states that larger quantities may receive more favorable pricing. Request a project-specific quotation based on the exact construction, weight, width, color, finish, quantity, packing, testing, and delivery terms.

Factory Visits

Factory visits are welcomed. The source also states that airport or station pickup may be arranged. Confirm the date, location, pickup point, and visiting schedule in advance.

FabricsTrades Sourcing and Development Support

FabricsTrades is located in Wujiang District, Suzhou, within one of China’s most concentrated textile manufacturing regions. In addition to operating its own 4-way stretch fabric factory, the company works as a fabric sourcing and product-development partner with access to specialized weaving, knitting, dyeing, printing, coating, finishing, and garment-support resources.

This sourcing structure can help buyers verify the correct base construction, compare peach-skin and satin options, develop colors, evaluate coating routes, and coordinate sampling or testing. It does not mean that every version or finish is automatically available or produced on the same manufacturing line; feasibility should be confirmed for each project.

The current product page reports more than 10 years of experience with polyester taffeta, satin, Oxford, and related fabrics, together with customer experience in the Middle East, South America, and Europe.

2024–2026 Fabric Regulations & Compliance Update

EU REACH PFHxA Restrictions for Treated Textiles

Because the page lists waterproof performance and several coating options, buyers should review the EU REACH PFHxA Restriction when developing EU-bound consumer products.

The restriction applies from 10 October 2026 to specified general-public clothing, related accessories, and footwear, with other general-public textiles following from 10 October 2027. It establishes limits of 25 ppb for the sum of PFHxA and its salts and 1,000 ppb for the sum of PFHxA-related substances, measured in homogeneous material.

This does not mean that the fabric contains PFHxA or that any quoted version is non-compliant. It means buyers requesting waterproofing, coating, or other chemical finishes should communicate the destination market and restricted-substance requirements before sampling. Confirm the finish chemistry and request applicable declarations, batch-relevant test reports, chemical-management information, or third-party testing support.

ESPR and Digital Product Passport Preparation

EU buyers may also need to monitor the ESPR and Digital Product Passport requirements for textile supply chains. Textile and apparel requirements are developing under the EU framework, and product-specific obligations will depend on future delegated acts and the finished product placed on the market.

Buyers can prepare by confirming product identity, composition, construction, finish, supplier and facility information, batch traceability, chemical documentation, care information, packaging data, and available conformity records. Requirements vary by destination market, product category, intended use, finish, and date of sale.

Available supporting documents depend on the final specification, production batch, testing request, and destination. Contact FabricsTrades before quotation if a restricted-substance list, test report, certificate, declaration, technical data sheet, traceability record, or third-party inspection is required.

Frequently Asked Questions

Is this product microfiber peach-skin fabric or polyester satin?

The source page uses all three descriptions: microfiber polyester, peach-skin fabric, and poly satin. Buyers should ask FabricsTrades to confirm the exact construction and approve a physical sample and specification sheet before ordering.

Is this fabric suitable for dye-sublimation printing?

The product is presented specifically for dye-sublimation printing, and its confirmed composition is 100% polyester. A print trial is still recommended because surface finishing and PA, PU, PVC, or silver coatings may affect transfer conditions, color yield, definition, and hand feel.

Are waterproof, flame-retardant, and anti-static properties standard?

The page lists waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties, but it does not state whether they apply to every version. Confirm the required property, finish, test method, performance level, and available supporting report before ordering.

What is the minimum order quantity?

The listed MOQ is 2,000 meters per color. Confirm whether the same MOQ applies to custom coatings, special widths, custom packaging, and OEM development.

How long does it take to finish a lab dip?

Normally, a lab dip takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the buyer’s requirements, and logo customization may be available. Confirm the customization method, artwork, placement, MOQ, cost, and approval process.

What is the production capacity?

The source lists daily output of up to 150,000 meters and monthly production capacity of more than 3 million meters. Actual availability depends on the selected specification and current production schedule.

What is the delivery time?

The listed bulk-production time is 3–20 days. FabricsTrades should confirm the applicable lead time after reviewing the quantity, color, construction, finish, testing, packing, and shipping requirements.

Can buyers visit the factory?

Yes. Factory visits are welcomed, and airport or station pickup may be arranged. Confirm the visit schedule and pickup details in advance.

How is the product price determined?

Pricing depends on the required quantity and quality specification. The page uses quantity-based pricing brackets, with more favorable pricing potentially available for larger orders. Request a quotation for the exact construction and commercial terms.

How long is one yard?

One yard equals 0.9144 meter.

Can FabricsTrades provide compliance documents or testing support?

Available documents depend on the final construction, finish, production batch, destination market, and requested standard. Before sampling, specify any required test report, certificate, declaration, restricted-substance standard, traceability record, or third-party testing requirement.

Request a Quote or Sample

For an accurate quotation or sample recommendation, provide:

• Intended application and finished product
• Required base construction, including whether peach skin, satin, or another microfiber fabric is needed
• Weight, density, nominal width, and usable width
• Color or print artwork
• Plain-dyed or coated finish requirement
• Required functional performance and test method
• Order quantity and color breakdown
• Roll length and packaging requirements
• Destination country and applicable market standard
• Required reports, certificates, declarations, or traceability information
• Target approval and delivery dates
• Preferred shipping and payment terms

Contact FabricsTrades to request a quotation, fabric sample, lab dip, print trial evaluation, available test report, compliance document, or custom-development assessment.