Simulation silk 5075 stretch satin for high-grade evening dress lining pajamas loungewear fabric

Product Overview

Simulation Silk 5075 is a made-to-order stretch satin developed primarily for high-grade evening-dress linings, pajamas, and loungewear. It combines a soft, silky-smooth surface with stretch for comfort and ease of movement.

“Simulation silk” describes the fabric’s silk-like appearance and hand feel; it does not confirm that the fabric contains natural silk. The current product page is categorized under both polyester satin and rayon/artificial silk, but it does not provide a definitive fiber-composition specification. Buyers should therefore confirm the exact composition, weight, width, stretch performance, and construction against the quotation, sample card, or technical data sheet before ordering.

Product Specifications

Specification	Available Information
Product name	Simulation Silk 5075 Stretch Satin
Style reference	5075, as shown in the product name; confirm against the quotation and sample card
Fabric type	Simulation-silk stretch satin
Supply type	Made to order
Fiber composition	Not stated. The page is categorized under both Polyester Fabrics/Polyester Satin and Rayon Fabric (Artificial Silk); confirm the exact fiber content and percentages before ordering
Construction	Satin; exact weave, yarn count, denier, and density are not stated
Surface and hand feel	Silky-smooth, soft, comfortable, and designed to imitate the feel of silk
Stretch	Described as stretch satin and categorized under 4-Way Stretch Fabric; exact stretch direction, percentage, recovery, and test method are not stated
Weight/GSM	Confirm with FabricsTrades
Width	Confirm with FabricsTrades
Finish or treatment	No specific coating, lamination, membrane, backing, or functional treatment is stated
Colors	Made to customer requirements; any color is stated as available
Primary applications	Evening-dress lining, pajamas, and loungewear
Other page-listed applications	Dresses, garments, linings, shirts and blouses, skirts, wedding and bridal products, home décor, and tents; suitability must be confirmed through sampling and application-specific testing
MOQ	Confirm with FabricsTrades
Reference sample	Free A4 sample available for reference
Lab-dip lead time	Normally 3–5 days
Approval-sample lead time	Normally 7–10 days for a plain color
Bulk lead time	The page states both 3–20 days for mass production and normally 15–25 days after the down payment is ready and the lab dip is confirmed. Confirm the applicable schedule for each order
Production capacity	More than 3 million meters per month
Customization	Customer-selected colors; OEM service and logo customization are available depending on the request
Price basis	Determined by requested functions, quality specification, and order quantity. The page refers to three online quantity-price levels, with more favorable pricing for larger quantities
Standard large-order payment	For first-time clients, typically 30% down payment and 70% before shipping by T/T
Other payment options	T/T and L/C at sight are normally accepted; L/C may be considered for repeat clients. Other terms must be negotiated in advance
Shipping methods	Express or sea freight
Packaging	Confirm packing method, roll length, roll diameter, labeling, and export-carton requirements before ordering
Length conversion	1 yard = 0.9144 meter
Factory visit	Visits are welcome; airport or station pickup may be arranged

Material, Construction, Appearance, and Hand Feel

Silk-Like Satin Character

The fabric is designed to imitate the smooth, luxurious feel associated with silk. Its soft satin face is intended to sit comfortably against the skin, making it commercially relevant for linings, sleepwear, and garments in which tactile quality is important.

The term “simulation silk” is an appearance and hand-feel description rather than a confirmed composition claim. Buyers who require a specific polyester, rayon, elastane, or other fiber percentage should request a confirmed specification.

Stretch and Wearing Comfort

The source describes the material as stretch satin and emphasizes its ability to move with the body. This characteristic can improve comfort in pajamas and loungewear and can help a lining coordinate with a fitted or stretch outer garment.

Because the exact stretch direction, elongation percentage, and recovery values are not supplied, garment developers should verify these properties on a sample before fixing patterns, seam specifications, or size tolerances.

Durability and Care

The existing product description characterizes the fabric as durable, long-lasting, and able to withstand normal wear and tear. It is also described as easy to care for without special treatment.

These are qualitative product descriptions rather than quantified test results. Washing and drying should follow the care instructions approved for the final color, construction, and garment. Buyers should request the relevant colorfastness, dimensional-stability, abrasion, snagging, or wash-performance information when required by their market or product program.

Key Product Features

• Soft, silky-smooth hand: Designed for comfortable contact with the skin and an elevated satin presentation.
• Stretch construction: Supports movement in sleepwear, loungewear, and fitted garment linings.
• Versatile styling potential: Primarily intended for evening-dress linings, pajamas, and loungewear, with other apparel uses subject to specification review.
• Made-to-order colors: Colors can be developed according to customer requirements.
• Qualitative durability: The source describes the material as suitable for long-lasting clothing and normal wear.
• Sampling support: A free A4 reference sample is available, with lab-dip and approval-sample services for plain colors.
• Scalable supply: The stated monthly production capacity is more than 3 million meters.

Detailed Applications and Use Cases

Evening-Dress and Occasionwear Linings

Evening-dress lining is a primary application for Simulation Silk 5075. The smooth satin surface can provide a comfortable layer between the skin and the outer fabric while helping garment layers slide over one another more easily.

Stretch may be particularly useful when lining fitted gowns, stretch lace, body-conscious evening dresses, or occasionwear requiring greater freedom of movement. The lining’s stretch direction and recovery should be matched to the shell fabric so that the two layers do not pull against each other.

Before production, buyers should evaluate:

• Weight and opacity in the selected color.
• Compatibility with the shell fabric’s stretch and drape.
• Seam slippage, fraying, snagging, and static behavior.
• Colorfastness and possible color transfer to light-colored outer materials.
• Whether the lining requires full-body, partial, or panel-specific placement.

Pajamas and Sleepwear

The soft, smooth hand and stretch quality support use in pajama sets, sleep shirts, camisoles, robes, and coordinated sleepwear. The satin face can create an elegant appearance while stretch provides additional comfort during movement.

The source does not state air permeability, moisture management, thermal resistance, or an exact fabric weight. Brands developing warm-weather or all-season sleepwear should assess breathability and thermal comfort on the finished sample rather than assuming these properties from the satin appearance alone.

Seam smoothness is especially important in sleepwear. Needle size, thread, stitch density, seam type, and elastic attachment should be tested to avoid puckering, skipped stitches, or uncomfortable seam bulk.

Loungewear

Simulation Silk 5075 may be used for relaxed trousers, shorts, camisoles, robes, wrap tops, and coordinated lounge sets. Its soft hand and stretch construction can support comfortable silhouettes that move with the wearer.

For wide-leg trousers or loose robes, evaluate drape, opacity, and seam stability. For more fitted styles, confirm stretch recovery and dimensional stability so that the garment maintains its intended shape after wear and laundering.

Dresses, Skirts, Bridalwear, Shirts, and Blouses

The product page also lists dresses, skirts, wedding and bridal products, shirts, and blouses. These should be treated as secondary or specification-dependent applications because the current page does not state the fabric’s weight, opacity, width, or exact composition.

Potential developments include:

• Satin dress or skirt linings.
• Soft bridal and bridesmaid-gown linings.
• Fluid blouses, shirts, camisoles, or dress panels.
• Gathered, ruffled, bias-cut, or softly draped styles.

A full-width sample should be reviewed before using the fabric as a visible outer layer. Buyers should evaluate opacity, surface marking, seam slippage, edge fraying, snag resistance, and how the satin face responds to pressing.

Home-Décor and Tent Applications: Conditional Use Only

Home décor and tents appear among the page’s application tags, but the current specification does not confirm the performance required for these end uses.

For decorative indoor products, assess abrasion resistance, lightfastness, dimensional stability, seam strength, and cleaning requirements.

Tent applications require additional properties that are not established on the source page, potentially including tear strength, tensile strength, water resistance, UV resistance, coating or lamination performance, and applicable flame requirements. Do not select this fabric for a technical tent program without application-specific development, testing, and written specification approval.

Design and Manufacturing Considerations

Confirm the Base Specification

Before pattern development or costing, confirm:

• Exact fiber composition and percentages.
• Finished weight and usable width.
• Yarn count, denier, density, and satin construction.
• Stretch direction, elongation percentage, and recovery.
• Shrinkage or dimensional change.
• Opacity and shade variation.
• Any finish, coating, or functional treatment.

Sampling and Fit Evaluation

Use the A4 reference sample for initial color and hand-feel review. A larger cutting or trial yardage may be needed to evaluate drape, garment fit, stretch coordination, spreading, cutting, and production sewing.

For fitted garments, compare the lining’s stretch and recovery with the outer fabric. A mismatch can cause restriction, sagging, twisting, or uneven stress at the seams.

Cutting and Sewing

Satin fabrics can be sensitive to handling, needle marks, seam puckering, and edge fraying depending on their exact yarn and construction. Conduct sewing trials before bulk cutting.

Consider evaluating:

• A fine, sharp needle selected for the confirmed fiber and fabric density.
• Stitch type, stitch density, thread size, and thread composition.
• Seam slippage and seam strength.
• Overlocking, binding, French seams, or another suitable edge finish.
• Reduced presser-foot pressure if the surface shifts or marks.
• Controlled cutting and consistent face direction where the satin reflection creates visible shade differences.

These are development considerations, not fixed requirements. The final sewing specification should be based on the approved bulk fabric and garment construction.

Color Approval and Care Testing

Plain-color lab dips normally take 3–5 days, followed by 7–10 days for an approval sample. Buyers should provide a physical color standard, Pantone reference, or approved digital color target and state the required light source and tolerance.

Care labels should be finalized only after confirming the fabric composition, dyeing route, colorfastness, dimensional stability, and garment components. If a buyer requires specific wash cycles, dry-cleaning performance, or retailer standards, communicate these requirements before sampling.

Customization, Sampling, and Bulk Ordering

Simulation Silk 5075 is supplied on a made-to-order basis. The source states that colors can be produced according to customer requirements and that OEM and logo customization are available depending on the project.

Potential development requests should be discussed before quotation, including:

• Custom colors and lab dips.
• Composition, weight, width, or stretch targets.
• Surface, hand-feel, or finishing requirements.
• Logo-related customization.
• Packaging, labeling, and roll-mark requirements.
• Testing, certification, declaration, and documentation needs.

A free A4 reference sample is available. Confirm whether courier charges, larger sample yardage, custom lab dips, approval samples, or development samples involve additional costs.

The product page provides two bulk-production time ranges: 3–20 days and normally 15–25 days after the down payment is ready and the lab dip is confirmed. The exact lead time depends on the specification, quantity, color approvals, finishing route, and production schedule, so buyers should obtain a written order-specific timeline.

For large first-time orders, the typical payment arrangement is 30% down payment and 70% before shipment by T/T. T/T and L/C at sight are generally accepted, while L/C may be considered for repeat clients. Alternative arrangements must be negotiated in advance.

Shipment can be arranged by express or sea freight. Confirm roll packing, export labeling, shipping marks, required documents, destination port, Incoterm, and delivery schedule before placing the order.

FabricsTrades Sourcing and Development Support

Located in Wujiang District, Suzhou, FabricsTrades operates within one of the world’s most concentrated textile manufacturing hubs and runs its own 4-way stretch fabric factory.

The company is not limited to a single production route. Access to nearby weaving, knitting, dyeing, printing, coating, finishing, and garment-support facilities enables the team to help buyers evaluate alternative constructions, colors, finishes, specifications, and development routes.

If the standard Simulation Silk 5075 specification does not fully meet the project requirements, buyers can ask FabricsTrades to assess the feasibility of an adjusted construction or sourced alternative. Availability, MOQ, performance, testing, cost, and lead time will depend on the final request.

The stated monthly production capacity is more than 3 million meters. Factory visits are welcome, and airport or railway-station pickup may be arranged.

2024–2026 Fabric Regulations & Compliance Update

For apparel, sleepwear, loungewear, and lining programs sold in regulated markets, buyers should confirm the legal and retailer requirements that apply to the final garment, destination, fiber composition, dyes, auxiliaries, finishes, and date of sale.

• EU product data and traceability: Buyers supplying textiles or apparel to the EU may need to monitor the ESPR and Digital Product Passport framework. Depending on the final product and applicable implementation rules, sourcing teams may need reliable product identification, confirmed fiber composition, supply-chain traceability, substances-of-concern information, and supporting technical documentation.
• Broader destination-market requirements: Review the 2024–2026 Global Textile Compliance Guide when developing programs for the EU, United States, or other regulated markets. Restricted-substance, labeling, traceability, PFAS, retailer RSL, and packaging obligations can vary by destination and product category.

These resources provide sourcing context and do not prove that Simulation Silk 5075 is certified or compliant with any particular law or standard. If a specific restricted-substance standard, test method, chemical restriction, certification, or retailer protocol applies, communicate it before sampling and quotation.

Available supporting documents may depend on the confirmed composition, finish, production batch, destination market, and requested testing. Contact FabricsTrades to request available test reports, certificates, declarations, technical data sheets, traceability information, or third-party testing support.

Frequently Asked Questions

How long does it take to finish a lab dip?

A plain-color lab dip normally takes 3–5 days. The approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the buyer’s requirements, and logo customization can be provided subject to feasibility confirmation.

What is the monthly production capacity?

The stated production capacity is more than 3 million meters per month.

What is the delivery time?

The existing page states 3–20 days for mass production. It also states that delivery is normally 15–25 days after the down payment is ready and the lab dip is confirmed. Obtain a written order-specific schedule because timing varies by quantity, color, specification, finishing requirements, and production availability.

May I visit the factory?

Yes. Factory visits are welcome, and airport or railway-station pickup may be arranged.

How is the product price determined?

Pricing depends on order quantity, quality specification, and requested functions. The page refers to three online quantity-price levels, with larger quantities receiving more favorable pricing. Contact FabricsTrades for a current quotation based on the final specification.

How long is one yard?

One yard equals 0.9144 meter.

Is Simulation Silk 5075 made from natural silk?

The current page does not state that the fabric contains natural silk. “Simulation silk” describes a silk-like hand and appearance. Because the page is categorized under both polyester satin and rayon/artificial silk, request the confirmed fiber composition before ordering.

Is this a confirmed 4-way stretch satin?

The product is described as stretch satin and appears in the 4-Way Stretch Fabric category. However, the exact stretch directions, elongation percentages, recovery, and test method are not stated. Confirm these values and approve a sample for applications in which stretch performance is critical.

Is the fabric suitable for both dress lining and loungewear?

Yes, evening-dress lining, pajamas, and loungewear are its primary stated applications. The final choice should still be based on confirmed weight, width, opacity, composition, stretch, recovery, colorfastness, and garment trials.

Can test reports or compliance documents be supplied?

Contact FabricsTrades with the destination market, product category, required standard, test method, and documentation list. The availability of reports, certificates, declarations, traceability records, or third-party testing support depends on the final specification and production batch.

Request a Quote or Sample

To request a quotation, A4 reference sample, lab dip, approval sample, technical information, or custom-development evaluation, provide:

• Intended garment or end use.
• Required fiber composition.
• Target weight and usable width.
• Required stretch direction, percentage, and recovery.
• Color or physical color standard.
• Finish and hand-feel requirements.
• Order and sample quantities.
• Destination market and delivery location.
• Testing standard or retailer protocol.
• Required certificates, declarations, or traceability documents.
• Packaging and labeling requirements.
• Target bulk-production and delivery date.

FabricsTrades can review the request and confirm the feasible specification, MOQ, sampling process, price, payment terms, production lead time, available documentation, and shipping options.