600D PU Coated Waterproof Polyester Oxford fabric for Tent Bags and Suitcases Baby Carriages

Product Overview

This 600D polyester Oxford fabric is a structured, PU-coated woven material developed for tent carry bags, suitcases, baby carriages, and related products requiring a durable textile surface with protection against water ingress.

The available specification combines a 100% polyester base, 600D yarn designation, 210 gsm finished weight, and 147 cm width. Its Oxford construction provides a visible woven texture and practical body, while the PU coating adds the waterproof functionality described for this product.

The page also lists plain-dyed, silver-coated, PA-coated, and PVC-coated production routes. Buyers should therefore confirm the required coating system, color, performance standard, and end-use construction before sampling or quotation.

Product Specifications

Specification	Available Information
Product Name	600D PU-Coated Waterproof Polyester Oxford Fabric
Fabric Type	Polyester Oxford woven fabric
Composition	100% polyester
Yarn Denier	600D; the existing specification lists this value under “Density,” so detailed yarn and construction information should be confirmed
Featured Finish	PU coating
Other Listed Finish Routes	Plain dyed, silver coated, PA coated, and PVC coated; availability and suitability require confirmation
Weight	210 gsm
Width	147 cm
Color	Custom colors according to customer requirements
Source-Listed Features	Waterproof, flame retardant, anti-static, tear-resistant, and shrink-resistant
Primary Applications	Tent bags, suitcases, and baby carriages
MOQ	2,000 meters per color
Lab-Dip Time	Normally 3–5 days
Plain-Color Approval Sample	Normally 7–10 days
Bulk-Production Lead Time	3–20 days
Reported Production Capacity	More than 3 million meters per month
Reported Daily Output	Up to 150,000 meters
Standard Roll Packaging	50, 100, or 200 meters per roll
Custom Packaging	Available according to buyer requirements, subject to confirmation
Typical Container Quantity	Approximately 40,000 meters per 20GP and 80,000 meters per 40GP
Shipping	Express or sea freight
OEM Support	Available depending on the buyer’s requirements
Logo Customization	Available subject to project confirmation
Unit Conversion	1 yard = 0.9144 meter

Weight, width, color, coating, usable width, roll length, tolerances, and required performance standards should be confirmed on the quotation, approved sample, and final order specification.

Material, Construction, Appearance, and Hand Feel

100% Polyester Base

Polyester gives this Oxford fabric a practical foundation for products exposed to handling, packing, folding, and regular use. The product page describes the material as resistant to wear and tear, supporting its positioning for luggage, equipment bags, and baby-carriage components.

The exact tensile, tear, abrasion, and dimensional-stability results are not stated. Buyers with measurable performance requirements should specify the applicable test method and acceptance level before sampling.

600D Oxford Construction

The 600D designation identifies the stated yarn-denier category; it is not an abrasion grade or a complete construction specification. Oxford fabrics normally use an interlaced woven structure that creates a recognizable textured surface and more body than lightweight apparel fabrics.

The finished yarn density, weave setting, coating add-on, usable width, and dimensional tolerances are not provided and should be confirmed when they affect cutting yield or product performance.

PU-Coated Waterproof Finish

The featured product uses a PU coating to help prevent water from passing through the fabric. However, the page does not state a hydrostatic-head rating, coating weight, coating side, water-repellency grade, or wash-durability result.

“Waterproof” should therefore be matched to the buyer’s actual end-use requirement. Products exposed to sustained rain, pressure, folded seams, or standing water may require additional testing and seam-management measures.

Surface and Hand Feel

The Oxford weave produces a textured, structured appearance suitable for functional consumer products. The existing content describes the surface as having an elevated, sophisticated look.

A specific softness, stiffness, coating tack, gloss level, or hand-feel standard is not stated. Buyers should request a physical sample because coating route, color, curing, and finishing can affect the finished surface and flexibility.

Key Product Features

• Waterproof functionality: The PU coating provides the water-protection function described for the featured specification. Required water-pressure or repellency performance should be confirmed by test standard.
• Durable construction: The 600D polyester base and Oxford structure are positioned for products subject to handling and everyday wear.
• Tear resistance: Tear resistance is listed as a product feature, but no test method or measured result is provided. Reinforcement may still be required at handles, corners, fasteners, and other concentrated-load areas.
• Flame-retardant and anti-static properties: Both features appear in the existing specification. Because no standard, rating, treatment type, or test report is stated, buyers must confirm whether these properties apply to the selected coating and production batch.
• Shrink resistance: Shrink resistance is listed as a feature. Buyers requiring a maximum dimensional-change tolerance should communicate the required test and care conditions before production.
• Custom color and finish options: Colors can be developed according to customer requirements. The page also lists several coating and finishing routes, allowing buyers to discuss alternatives for different products and cost targets.
• Care convenience: The existing product information describes the fabric as machine washable and quick drying. The final care method should nevertheless be validated for the selected coating, assembled product, trims, printing, and required service life.

Detailed Applications and Use Cases

Tent Carry and Storage Bags

This fabric is primarily suitable for bags used to carry or store tents and related outdoor equipment. The 600D construction provides practical body for shaped or cylindrical bags, while the polyester base supports repeated handling. The PU coating can help protect packed contents from rain, splashes, and damp surfaces.

Handle attachments, shoulder-strap points, zipper ends, and bag bases are high-stress areas and may require reinforcement. If water entry through stitched seams is a concern, the manufacturer should evaluate seam tape, bound seams, covered zippers, or another suitable construction method.

The finished product should be tested under the actual load, seam construction, closure design, and weather exposure expected in use.

Suitcases and Luggage Components

The structured Oxford texture can be used for soft-sided suitcases, travel bags, duffel bags, luggage panels, internal dividers, protective covers, and accessory pockets. Its textured appearance gives functional luggage a more substantial woven surface than a lightweight plain fabric.

For exterior luggage panels, buyers should evaluate abrasion exposure, seam strength, colorfastness, coating adhesion, water resistance, and resistance to repeated flexing. High-load points around handles, wheels, frames, and straps normally require a complete reinforcement system rather than relying on the face fabric alone.

A lining, foam, board, webbing, binding, or backing may be necessary when the final product requires additional shape, cushioning, or structural stability.

Baby Carriages and Stroller Components

The source identifies baby carriages as an intended application. Depending on the approved design, the fabric may be evaluated for canopies, outer panels, seat-back structures, storage baskets, foot-area panels, accessory bags, or protective covers.

The PU-coated surface can be commercially useful where protection from light rain, spills, or outdoor exposure is required. However, the exact child-contact component must be defined before material approval. Seat-contact surfaces may require additional lining, padding, breathability evaluation, seam design, and comfort testing.

Baby and child products are subject to market-specific chemical, mechanical, flammability, labeling, and safety requirements. The source page does not provide evidence of compliance with a particular stroller or child-product standard. Buyers should communicate the destination market, component location, age group, restricted-substance requirements, and required test standards before sampling.

Related Utility Products

The page describes the application range as tent bags, suitcases, baby carriages, “and so on.” Related carrying goods or protective textile components may be explored through custom development, but suitability should not be assumed solely from the 600D designation.

Validate the physical sample, coating system, reinforcement, seam construction, appearance, and required laboratory performance before extending the fabric to another product category.

Design and Manufacturing Considerations

Confirm the Required Waterproof Performance

Specify whether the project needs resistance to splashes, rainfall, water pressure, or prolonged outdoor exposure. The source does not provide a hydrostatic-head value or water-repellency rating.

PU coating can reduce water penetration through the fabric body, but sewing creates needle holes. Seam sealing or another engineered construction may be needed where finished-product water resistance is critical.

Define the Coating Route

The featured product is PU coated, while the page also lists PA, PVC, silver-coated, and plain-dyed routes. These finishes can differ in appearance, flexibility, weight, odor, water resistance, durability, processing behavior, and regulatory requirements.

Confirm the selected route in the approved sample and purchase specification. An alternative finish should not be treated as interchangeable with the featured PU-coated version without evaluation.

Reinforce Concentrated-Load Areas

Bag handles, stroller attachment points, luggage corners, zipper ends, wheels, and strap anchors can place concentrated stress on a small fabric area. Appropriate webbing, backing patches, bar tacks, seam allowance, and internal reinforcement should be developed at the finished-product level.

Plan Needle, Thread, and Seam Selection

Needle size, thread type, stitch density, seam allowance, and seam construction should be matched to the coating, number of fabric layers, and required load. Excessive needle penetration can affect both seam strength and resistance to water ingress.

A production trial is recommended before bulk cutting, particularly where multiple coated layers, bindings, zippers, foam, board, or webbing are assembled together.

Control Edges and Coating Damage

As a woven polyester fabric, cut edges may require binding, overlocking, heat cutting, or another controlled finishing method. The appropriate method depends on the final coating and production equipment.

Coating surfaces should also be checked after folding, sewing, printing, bonding, and repeated flexing. Buyers requiring a particular bonding or printing process should test adhesion and appearance on the approved fabric.

Validate Functional Claims

Flame retardancy, anti-static behavior, tear resistance, shrink resistance, and waterproof performance are listed without test standards or ratings. Communicate the required method and acceptance criteria before quotation so that the relevant construction, finish, and testing plan can be evaluated.

Confirm Care Instructions

The existing page describes the material as machine washable and quick drying. Because repeated washing can affect some coating systems, buyers should validate care conditions on the final fabric and assembled product before issuing consumer care instructions.

Customization, Sampling, and Bulk Ordering

Available Customization

FabricsTrades can discuss:

• Custom colors according to customer requirements
• PU, PA, PVC, silver-coated, or plain-dyed production routes, subject to feasibility
• OEM development based on the buyer’s project
• Logo customization
• Roll length and packaging requirements
• Alternative specifications or finishes where the standard product does not meet the end use

All customization options depend on the final specification, quantity, process, performance target, and production feasibility.

Lab Dips and Approval Samples

Lab dips normally require 3–5 days. Approval samples for plain colors normally require 7–10 days.

Sample quantity, sample charges, courier cost, sample payment method, coating route, and approval criteria should be confirmed before development begins. Buyers should approve color, hand feel, coating appearance, weight, width, and required performance before bulk production.

MOQ and Production Lead Time

The listed MOQ is 2,000 meters per color. Mass-production lead time is stated as 3–20 days.

Actual timing may depend on quantity, color approval, coating or finishing route, raw-material availability, testing, packaging, and production scheduling. Confirm the shipment date on the final quotation or pro forma invoice.

Production Capacity

The page reports production capacity of more than 3 million meters per month and daily output of up to 150,000 meters. Capacity and lead time for this specific Oxford construction should be reconfirmed for the required color, coating, quantity, and delivery window.

Packaging and Container Loading

Standard packaging can use rolls of 50, 100, or 200 meters per roll, or packaging can be arranged according to buyer requirements.

The page lists typical quantities of approximately:

• 40,000 meters per 20GP container
• 80,000 meters per 40GP container

These figures are described as usual quantities and may change with roll diameter, coating, packing method, usable width, and container-loading plan.

Shipping

Available shipping methods include express delivery and sea freight. The appropriate method depends on sample or order quantity, destination, required delivery time, and freight cost.

Pricing

Pricing is determined according to quantity and quality requirements. The page refers to three online quantity-based price levels and states that larger quantities may receive more favorable pricing.

Request a project-specific quotation because color, coating, testing, packaging, order quantity, and delivery terms can affect the final price.

Payment Terms Requiring Confirmation

The page contains two descriptions of large-order payment timing:

• For first-time customers: 30% deposit and 70% before shipping by T/T
• In the detailed product information: 30% advance payment and 70% upon receipt of a copy of the bill of lading

For repeat customers, L/C may be considered, and other payment terms may be negotiated. Because the stated 70% payment milestones differ, the applicable terms must be confirmed on the quotation, sales contract, and pro forma invoice before ordering.

FabricsTrades Sourcing and Development Support

Located in Wujiang District, Suzhou, FabricsTrades operates within one of the world’s most concentrated textile manufacturing regions. The company combines its own manufacturing capabilities with access to specialized weaving, dyeing, printing, coating, finishing, and product-support facilities.

The page reports more than 10 years of experience with polyester Oxford, taffeta, satin, and related fabrics, as well as experience serving buyers in the Middle East, South America, and Europe.

If this 600D PU-coated specification does not fully match the intended product, the FabricsTrades team can help evaluate alternative colors, coating routes, constructions, specifications, packaging, or custom-development options. Feasibility, MOQ, performance, documentation, and lead time must be confirmed for each project.

Factory visits are welcome. The existing information also states that airport or railway-station pickup can be arranged when required.

2024–2026 Fabric Regulations & Compliance Update

Waterproof and coated textiles may require additional chemical and traceability review, depending on the coating formulation, other applied finishes, finished-product category, and destination market. A PU coating alone does not establish whether PFAS or another restricted substance is present or absent.

Buyers placing luggage accessories, bags, stroller-related textile articles, or other consumer products on the EU market may need to review the EU REACH PFHxA Restriction. Application dates and requirements can vary according to the final product classification. If a restricted-substance or fluorinated-chemistry requirement applies, communicate it before sampling and request appropriate declarations, finish-chemistry information, and batch-relevant testing.

EU-bound product programs may also need to prepare for evolving ESPR and Digital Product Passport requirements. Buyers may need reliable records covering product identification, fiber composition, coating or finishing processes, substances of concern, production traceability, and supporting conformity documentation.

Legal and retailer requirements vary by destination market, product category, intended use, finish, and date of sale. Before bulk production, confirm the applicable standards with qualified compliance professionals and the responsible importer or brand team.

Available test reports, certificates, declarations, technical data sheets, traceability records, or third-party testing support may depend on the selected specification, finish, color, production batch, destination market, and buyer request. Do not treat this product page as proof of certification or legal compliance.

Frequently Asked Questions

How long does a lab dip take?

A lab dip normally takes 3–5 days. An approval sample for a plain color normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM support depends on the buyer’s requirements, and logo customization can be discussed for the project. Feasibility, MOQ, development cost, and lead time should be confirmed before sampling.

What is the production capacity?

The page reports monthly production capacity of more than 3 million meters and daily output of up to 150,000 meters. Capacity for the selected 600D Oxford specification should be reconfirmed against the required color, coating, quantity, and delivery schedule.

What is the bulk-production lead time?

The stated mass-production lead time is 3–20 days. Actual timing depends on order quantity, color and sample approval, coating route, testing, packaging, raw-material availability, and production scheduling.

Can buyers visit the factory?

Yes. Factory visits are welcome, and airport or railway-station pickup can be arranged. Confirm the visit schedule with FabricsTrades in advance.

How is the product price determined?

The price depends on the required quality and order quantity. The page describes three online quantity-based price levels and notes that larger quantities may receive more favorable pricing. Request a quotation based on the exact color, coating, quantity, packaging, testing, and delivery terms.

How long is one yard?

1 yard equals 0.9144 meter.

Is a numerical waterproof rating available?

The page identifies the featured PU-coated fabric as waterproof, but it does not provide a hydrostatic-head value or other measured rating. Buyers should specify the required test method and performance level and request available test information before bulk production.

Are flame-retardant, anti-static, tear-resistant, and shrink-resistant test reports available?

These properties are listed as product features, but the page does not identify test methods, standards, grades, or measured results. Confirm which properties apply to the selected specification and request available reports or third-party testing support when required.

Is the fabric machine washable?

The existing product information describes the fabric as machine washable and quick drying. The final care method should be confirmed and tested for the selected coating, color, printing, trims, and assembled product before care labels are issued.

Request a Quote or Sample

For an accurate quotation or sample evaluation, please provide:

• Intended product and exact fabric component
• Required 600D construction or alternative specification
• Target weight and usable width
• Color or lab-dip reference
• Required PU, PA, PVC, silver-coated, or plain-dyed finish
• Waterproof, flame-retardant, anti-static, tear, shrinkage, or other test requirements
• Order quantity per color
• Roll length and packaging requirements
• Destination market and shipping destination
• Required certificates, declarations, test reports, or traceability documents
• Target approval and bulk-delivery dates

Contact FabricsTrades to request a quotation, physical sample, lab dip, available technical information, supporting documents, or an evaluation of a custom-developed specification.