High Quality 70D 210T nylon taffeta waterproof plain woven fabric

Product Overview

This 70D nylon taffeta is a lightweight, plain-woven fabric made from 100% nylon. The product title identifies a 210T waterproof construction, while the detailed specifications also list 190T, 210T, and other density options. Buyers should therefore confirm the required density, coating, finish, color, and performance standard when requesting a sample or quotation.

At a listed weight of 65 gsm and a width range of 57–67 in (150–170 cm), the fabric is suitable for lightweight bags, luggage components, umbrellas, garment linings, apparel, bedding, curtains, home textiles, sofa or upholstery components, costumes, toys, and selected wedding or bridal applications.

The page lists plain-dyed fabric as well as silver, PA, PU, and PVC-coated options. Waterproof performance, hand feel, appearance, stiffness, care requirements, and end-use suitability can vary substantially according to the selected finish. Approval should therefore be based on the exact sampled construction rather than the general product name alone.

Product Specifications

The waterproof, flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are preserved from the source page. Because several plain-dyed and coated versions are listed, buyers should confirm which properties apply to the selected construction. Where a measured performance level is required, communicate the test method and acceptance criteria before sampling and request available supporting reports or third-party testing.

Material, Construction, Appearance, and Hand Feel

The 100% nylon composition provides a lightweight base for applications where fabric bulk must be controlled. The 70D yarn designation and 190T or 210T density options indicate a relatively fine, compact woven construction, while the plain weave provides a stable surface for dyeing or coating.

Nylon taffeta of this construction typically has a smooth face and a relatively crisp, structured hand rather than a soft, fluid drape. The exact feel and appearance will depend on whether the fabric is supplied plain dyed or with a silver, PA, PU, or PVC coating. Coatings may increase surface body, coverage, water resistance, or stiffness, so buyers should compare physical samples of the intended finish.

The original page describes the fabric as durable, long-lasting, versatile, and easy to care for. No quantified abrasion, tear, shrinkage, waterproofness, wash-durability, flame-retardancy, or anti-static test results are stated. Request the relevant test method and available data if any of these properties are critical to the finished product.

Key Product Features

• Lightweight specification: The listed 65 gsm weight is suitable for lightweight shells, linings, covers, and components where low fabric weight is important.
• Configurable density and finish: The page lists 190T and 210T densities together with plain-dyed, silver, PA, PU, and PVC-coated versions.
• Custom colors: Colors can be developed according to the buyer’s requirements, supported by a normal lab-dip time of 3–5 days.
• Waterproof product positioning: The 210T product is presented as waterproof and is recommended for bags, umbrellas, curtains, and outdoor products. The required waterproof level and test method should be confirmed for the selected coating.
• Additional functional claims: Flame-retardant, anti-static, tear-resistant, and shrink-resistant properties are listed. Their availability may depend on treatment, finish, and final specification.
• Flexible commercial support: OEM/logo customization, custom packaging, approval samples, bulk production, and several roll-length options are available subject to project confirmation.

Detailed Applications and Use Cases

Bags and Luggage

The lightweight nylon construction is suitable for bag shells, drawstring bags, packing bags, internal dividers, pockets, luggage linings, and selected covers. A coated version may be chosen where resistance to rain or surface moisture is required.

For load-bearing bags or luggage exposed to repeated abrasion, the 65 gsm fabric may require reinforcement, backing, or combination with a heavier structural material. Buyers should evaluate seam strength, tear resistance, coating adhesion, abrasion resistance, and waterproofness on the finished product before approving bulk production.

Umbrellas and Lightweight Outdoor Products

The source specifically recommends the waterproof 70D 210T fabric for umbrellas and other outdoor products. Its light weight can help control the finished product’s packed size and overall weight.

The fabric alone does not determine the waterproofness of a completed product. Seams, needle holes, panel construction, coating continuity, and assembly methods can all affect water penetration. Confirm the required waterproof test, coating type, colorfastness, and weather-exposure expectations during development.

Garment Linings and Apparel

The smooth taffeta surface can support easy dressing and controlled garment structure when used as a lining. Potential uses include jacket linings, coat linings, costume components, wind-resistant layers, and selected lightweight garments.

Because coating can change breathability, noise, stiffness, and skin comfort, garment buyers should sample the exact finish before selecting it for full linings or next-to-skin applications. Anti-static treatment, colorfastness, seam performance, and care requirements should also be confirmed when relevant.

Costumes and Wedding or Bridal Components

The product page includes costume and wedding or bridal application tags. Plain-dyed or subtly lustrous versions may be evaluated for structured decorative layers, underskirts, costume panels, accessories, or non-primary garment components.

Buyers should review the fabric’s opacity, surface shine, hand, drape, sewing behavior, and compatibility with other layers. Coated versions may be too firm for designs requiring soft movement, so a plain-dyed sample should be considered where appearance and flexibility are more important than waterproof performance.

Bedding, Curtains, and Home Textiles

Listed home-textile uses include bedding, curtains, home décor, sofas, and related products. At 65 gsm, the fabric is most likely to be evaluated as a lining, backing, cover, protective layer, or decorative component rather than a heavy-duty upholstery face fabric.

For curtains, upholstery components, bedding, or public-space products, confirm applicable flame-retardancy, colorfastness, wash or cleaning performance, tear strength, and restricted-substance requirements. Do not rely on the general feature list as proof of a specific market standard.

Sofa, Upholstery, and Toy Components

The source lists sofa and toy applications. Suitable uses may include internal lining, backing, dust-cover, protective, or decorative components where a lightweight woven nylon is appropriate.

Final suitability depends on the component’s location and exposure. Products subject to high abrasion, direct body contact, children’s-product rules, or mandatory flammability requirements require application-specific material assessment and testing before production.

Design and Manufacturing Considerations

• Approve the exact 190T or 210T construction rather than relying only on the product title.
• Confirm whether the order is plain dyed, silver coated, PA coated, PU coated, or PVC coated.
• Use a physical sample to evaluate hand feel, surface appearance, stiffness, opacity, coating uniformity, and color.
• Select needles, thread, stitch density, and seam construction through sewing trials. Excessive needle size or stitch density may damage lightweight fabric or coated surfaces.
• Control cut edges and seam allowances because lightweight taffeta may fray during handling.
• If waterproof performance is required, assess seams, needle holes, bindings, closures, and any seam-sealing process as part of the finished-product test.
• Coating type can affect heat sensitivity, bonding, printing, washing, drying, and storage. Obtain care and processing guidance for the selected finish.
• Confirm flame-retardant, anti-static, tear-resistant, shrink-resistant, and waterproof requirements using the buyer’s intended test standards.
• Approve the lab dip and finished approval sample before bulk production, especially when color, coating, and hand feel must match an established product.
• Allow for bulk testing when the product will be sold into a regulated market or used in a performance-critical application.

Customization, Sampling, and Bulk Ordering

Custom colors can be produced according to the buyer’s requirements. The normal lab-dip time is 3–5 days, while an approval sample for a plain color normally requires 7–10 days.

OEM service is available depending on the project requirements, and the source page states that logos can be customized on the products. Buyers may also discuss the required density, coating, finish, color, roll length, and packaging. Feasibility and any separate customization MOQ should be confirmed during quotation.

The stated MOQ is 2,000 meters per color. Bulk-production lead time is listed as 3–20 days, depending on the order. The page reports daily output of up to 150,000 meters and monthly production capacity of more than 3 million meters. Confirm the schedule against the selected construction, coating, color count, order quantity, and current production plan.

Standard packaging options are 50, 100, or 200 meters per roll. Other packing details can be arranged according to the buyer’s requirements. The usual listed loading quantities are 180,000 meters for one 20GP container and 360,000 meters for one 40GP container. Actual loading depends on roll length, packing method, width, and shipment conditions.

Express and sea freight are listed as available shipping methods. Sample-payment methods and freight arrangements should be confirmed when placing the sample order.

Payment and Pricing Information

The source page contains two descriptions of the large-order payment balance:

• The product description states 30% by T/T as advance payment and 70% by T/T upon receipt of the copy of the bill of lading.
• Another page section states that first-time clients normally pay 30% down and 70% before shipping by T/T.

Repeat clients may be considered for L/C, and other payment terms can be negotiated. Because the timing of the 70% balance is stated differently, buyers should confirm the applicable payment milestone in the formal quotation or proforma invoice.

Pricing depends on the ordered quantity and required quality or specification. The original page describes three quantity-related online pricing levels and states that larger quantities receive more favorable pricing. Request a current quotation based on the exact density, coating, color, width, quantity, packaging, and destination.

For quantity conversions, 1 yard equals 0.9144 meter.

FabricsTrades Sourcing and Development Support

Located in Wujiang District, Suzhou, FabricsTrades operates within one of the world’s most concentrated textile-manufacturing regions. In addition to its own manufacturing capabilities, the company can coordinate with nearby weaving, dyeing, printing, coating, finishing, and garment-support facilities to evaluate alternative constructions or finishing routes.

The source page reports more than 10 years of experience with polyester taffeta, satin, Oxford, and related fabrics, as well as customer experience in the Middle East, South America, and Europe. This nylon taffeta should nevertheless be evaluated according to its own confirmed composition, construction, coating, and production route.

If the listed 70D, 190T or 210T, 65 gsm specification does not fully match the project, FabricsTrades can review alternative density, finish, color, width, packaging, or custom-development requirements. Availability should be confirmed through technical discussion and sampling.

Factory visits are welcome, and the source page states that airport or station pickup can be arranged. Contact the team in advance to confirm the factory location, appointment, and production line relevant to the requested product.

2024–2026 Fabric Regulations & Compliance Update

Because this product is offered with waterproof and coated finishing options, buyers should identify the exact finishing chemistry and destination-market requirements before approving production.

• EU REACH PFHxA Restriction: EU-bound clothing, related accessories, bags, and other consumer-textile programs may need to review the PFHxA restriction and its product-category application dates. Requirements may differ between apparel/accessories and other consumer textiles.
• California AB 1817 PFAS Textile Ban: California requirements may be relevant to finished textile articles such as handbags, backpacks, furnishings, upholstery, bedding, curtains, and other products made with coated or water-repellent fabric.

These resources provide compliance context and do not prove that this fabric, a particular coating, or a production batch is certified, PFAS-free, or compliant with a specific law.

For regulated programs, communicate the restricted-substance standard before sampling. Depending on the selected finish and market, buyers may need to request available chemical declarations, finish SDS or TDS documents, product-specific certificates, technical data, traceability information, batch-linked test reports, or third-party testing. Legal and retailer requirements should be confirmed for the finished product, destination market, intended use, and sale date.

Frequently Asked Questions

How long does a lab dip take?

A lab dip normally takes 3–5 days. A plain-color approval sample normally takes 7–10 days.

Can FabricsTrades provide OEM service?

Yes. OEM service depends on the buyer’s requirements, and logo customization is available subject to product and order confirmation.

What is the production capacity?

The source page states that monthly production capacity has reached more than 3 million meters. It also lists daily output of up to 150,000 meters. Capacity for a specific order should be confirmed according to the construction, finish, color count, and production schedule.

What is the bulk-production delivery time?

The listed mass-production lead time is 3–20 days. The final schedule depends on quantity, color approval, coating or finishing requirements, packaging, and current capacity.

May I visit the factory?

Yes. Factory visits are welcome, and airport or station pickup can be arranged. Confirm the appointment and location with FabricsTrades before traveling.

How is the product price determined?

The price is determined according to the required quality or specification and order quantity. The source page describes three quantity-related price levels, with more favorable pricing for larger quantities. Request a current quotation for the exact construction and finish.

How long is one yard of fabric?

One yard equals 0.9144 meter.

Request a Quote or Sample

To request a quotation, lab dip, approval sample, available technical document, or custom-development evaluation, provide:

• Intended application and finished-product type
• Required 190T or 210T density
• Required 70D or alternative yarn specification
• Target weight and width
• Plain-dyed, silver, PA, PU, or PVC-coated finish
• Required color or color standard
• Waterproof, flame-retardant, anti-static, tear, shrinkage, or other performance requirements
• Test methods and acceptance criteria
• Order quantity and number of colors
• Roll length and packaging requirements
• Destination country and target market
• Required certificates, declarations, test reports, or traceability documents
• Target sample and bulk-delivery dates

FabricsTrades can review the specification and advise on sampling, available finishes, alternative constructions, documentation, production planning, and quotation options.